Instantly download HPE7-A11 training test engine

Refer to the exhibit.

Ensuring uninterrupted client connectivity during gateway fail over is a top priority for your customer's AOS-10 deployment.
Which option explains the AP redundancy strategy for the customer's HPE Aruba Networking environment with minimal disruption when transitioning between primary and secondary gateway clusters?

• A. The secondary cluster does not need to be in the same Group as the Primary cluster, but it must be part of the same tenant account.
• B. Create an organizational mobility domain, then ensure both the primary and secondary clusters are added to the same mobility domain.
• C. Verify that all participating APs and gateways can establish IPsec connections with gateways that are members of either the primary or secondary clusters.
• D. Configure the Cluster Orchestrator to setup a state synchronization IPsec tunnel between the primary and secondary cluster leaders.

A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
Based on the best practices, what should you recommend as the most cost-effective switch model for the cabins?

• A. HPE Aruba Networking 6200F 12G Class4 PoE 2G/2SFP+
• B. HPE Aruba Networking 6100 24G Class4 PoE 4SFP+
• C. HPE Aruba Networking 6100 12G Class4 PoE 2G/2SFP+
• D. HPE Aruba Networking 6000 12G Class4 PoE 2G/2SFP

A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of 'No-Stair Inc." has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company is minimally engaged in their LAN refresh so the CTO of the company has shared the information below.
Current WLAN Infrastructure is based on the 802.11n "WIFI4Less" access-points series (both model 2013-INT (2.4 only internal antenna) and model 2019-EXT (dual-band external antenna only). These AP models are standalone without any centralized management. Last year 'No-Stair Inc.' ran a project called 'secure-it' ensuring that all needed network security was implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA.
Infrastructure to handle the increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs, with local breakout into different VLANs.
The CTO of 'No-Stair Inc.' understands the need for you to ask additional questions to deliver the design. The questions may be sent in written form and will be answered within two weeks.
Which additional question is correct in order to collect needed information for the WLAN design?

• A. Is there a current RF survey report that you can share?
• B. Is there an SD-WAN solution such as EdgeConnect?
• C. Give a brief list of the current critical wired issues that the existing switches do not support.
• D. What WAN redundancy is required should a remote WAN or ISP connection fail?

XYZ Regional Hospital is an integrated healthcare system of hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 4x neighborhood health centers and 125 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital is located in New York City
- Dila Health Center is located in City A
- Mount Health Center is located in City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and Service Level performance reporting.
- Seamless integration across wired, wireless, WAN, SD-Branch, IoT
- Provide secure wireless access to all the employees of the Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.11.ax (Wi-Fi 6E Certified)
- Security options including WP2/WPA3, 802.1X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital for medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital A Regional Hospital is looking to improve wireless coverage at their main campus. They would like to perform a wireless survey to address their wireless issues.
What Wi-Fi requirements should the Network Architect request to perform the wireless survey?
(Choose two.)

• A. building maps for Health Centers
• B. wireless issues reported at the clinics
• C. latency-sensitive applications
• D. square footage of the clinics
• E. number of devices and device types

Refer to the exhibit.

As part of a migration plan from HPE Aruba Networking AOS-8 to AOS-10, which represent valid technical requirements for the proposed deployment?

• A. AOS-10 APs require TCP dest.port 443 and sometimes need TCP dest.port 2083 access through Internet perimeter firewall.
• B. If an AOS-8 MCR is added to a new HPE Aruba Networking SaaS Central Group, it can be performance monitored in the Cloud.
• C. Some HPE Aruba Networking 2xx, and all 3xx, 5xx, and 6xx Series Access Points can be migrated from an Instant AOS-8 cluster to AOS-10.
• D. Recent versions of HPE Aruba Networking AirWave supports preparing AOS-8 to AOS-10 upgrade by means of firmware upgrading.