100% Pass Your NSE6_FWF-6.4 Exam Dumps at First Attempt with Pass4training
Penetration testers simulate NSE6_FWF-6.4 exam PDF
NEW QUESTION 17
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiSwitch
- D. FortiGate
Answer: B,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 18
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Comparing current data with historical records
- B. Reporting potential threats by guests on site
- C. Predicting the number of guest users visiting on-site
- D. Gathering details about on site visitors
Answer: C,D
NEW QUESTION 19
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local standalone configuration option
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Install supported FortiAP and configure a bridge mode wireless network
Answer: A
NEW QUESTION 20
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Clone a suitable FortiAP profile and change the county code settings on the profile
- B. Configure the APs individually by overriding the settings in Managed FortiAPs
- C. Configure the controller for the correct country code for Germany
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: A
NEW QUESTION 21
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Preauthorize APs
- B. Create a custom AP profile
- C. Set the wireless controller country setting
- D. Create wireless LAN specific policies
Answer: B
NEW QUESTION 22
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: C
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 23
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- D. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
Answer: B
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION 24
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Multicast
- C. DHCP
- D. Broadcast
Answer: C
NEW QUESTION 25
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 26
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. An X.509 certificate to authenticate the client
- C. A WPA2 or WPA3 Enterprise wireless network
- D. An X.509 to authenticate the authentication server
- E. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
Answer: B,D
NEW QUESTION 27
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- C. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- D. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
Answer: B,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 28
Which statement is correct about security profiles on FortiAP devices?
- A. FortiGate performs inspection the wireless traffic
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- C. Disable DTLS on FortiAP
- D. Only bridge mode SSIDs can apply the security profiles
Answer: D
NEW QUESTION 29
......
All NSE6_FWF-6.4 Dumps and Training Courses: https://www.pass4training.com/NSE6_FWF-6.4-pass-exam-training.html
Help candidates to study and pass the Fortinet NSE 6 - Secure Wireless LAN 6.4 Exams hassle-free: https://drive.google.com/open?id=15XaJxUgpgg_ytotWfXkhDa9Or6nDIbcp
