2022 Realistic C-HANATEC-17 Dumps Exam Tips Test Pdf Exam Material
Powerful C-HANATEC-17 PDF Dumps for C-HANATEC-17 Questions
Following is the info about the Passing Score, Duration & Questions for the SAP C_HANATEC_17 Exam
The passing score: 61%
Time Duration: 180 minutes
Languages: English
Number of Questions: 80 questions
Why is the SAP C_HANATEC_17 Exam certification difficult to write?
One of the main reasons why this certification is difficult is that the exam is very broad and has a wide scope. A candidate needs to have a wide knowledge of the SAP HANA. The knowledge needed is very broad. Therefore, the questions asked in the certification exam are very broad and have a very wide scope. This is one of the main reasons why this certification is difficult to write. You need to be very careful when answering the questions. You cannot just go to a website and take a look at the questions. You need to take your time to go through the questions carefully. This is very important. You need to understand the questions before answering them. SAP C_HANATEC_17 Dumps will help you in writing a great certification exam. It will help you in getting the maximum marks in the certification exam. It will help you in scoring high in the certification exam. Definitely, it will help you in becoming successful in the certification exam. It will help you in making your career easy. It will also help you in achieving success in your career.
NEW QUESTION 70
Which connections do you need to enable explicitly for a Restricted user?
There are 2 correct answers to this question.
- A. JDBC
- B. OLEDB
- C. ODBC
- D. ADO.NET
Answer: A,C
NEW QUESTION 71
What do you need in a Multitenant Database Container (MDC) system to run queries across tenant databases? There are 2 correct answers to this question.
- A. The bidirectional communication channel must be whiteliste
- B. The user in the source system must have sufficient privileges in the target database
- C. The cross-tenant database communication must be explicitly activate
- D. The user in the source system must be associated with a user in the target database
Answer: C,D
NEW QUESTION 72
What is the minimum space requirement for the Data Volume? There are 2 correct answers to this question.
- A. Min. 0.5 * RAM
- B. 1.2 * RAM (TDI)
- C. Min. 1 * RAM
- D. 3 * RAM (Appliance)
Answer: B,D
NEW QUESTION 73
Which replication modes keep the primary system waiting until a timeout is exceeded when the secondary system is not available? There are 2 correct answers to this question.
- A. SYNCMEM
- B. ASYNC
- C. FULL SYNC
- D. SYNC
Answer: A,D
NEW QUESTION 74
Which best practices do you apply when you optimize the table distribution in a scale-out SAP HANA database?
There are 2 correct answers to this question.
- A. The columns of a table can be distributed over all nodes.
- B. The row store can be distributed over all nodes.
- C. Table partitions can be distributed over all nodes.
- D. Cross-node joins must be avoided.
Answer: B,C
NEW QUESTION 75
Where is SDI used? There are 2 correct answers to this question.
- A. Data cleansing
- B. Data transformation
- C. Data streaming
- D. For data loading
Answer: B,D
NEW QUESTION 76
Where are the R3load processes located when performing the Database Migration Option (DMO) procedure using the in-place migration? Please choose the correct answer.
- A. On the Additional Application Server (AAS) host
- B. On the source and target host
- C. On the Primary Application Server (PAS) host
- D. On the remote target database host
Answer: C
NEW QUESTION 77
Which alert configuration properties can you configure in SAP HANA cockpit? There are 3 correct answers to this question.
- A. Email alert notification
- B. Alert checker category
- C. Schedule activation
- D. Alert threshold values
- E. Schedule period
Answer: A,B,D
NEW QUESTION 78
Which package of SAP HANA cloud platform provides a vast set of platform services for the most common pattern in software engineering, such as persistence, connectivity, identity and document management?
- A. SAP HANA Enterprise Cloud
- B. SAP HANA DBServices
- C. SAP HANA AppServices
- D. SAP HANA Infrastructure Services
Answer: C
NEW QUESTION 79
Which tool shows the difference of tables and indexes between your ABAP dictionary and your SAP HANA database?
- A. hdbsql
- B. DBA Cockpit
- C. hdblcm
- D. SAP HANA cockpit
Answer: B
NEW QUESTION 80
You need to update the location where a copy of the persistent data is saved. Which of the following parameters do you change? Note: There are 2 correct answers.
- A. basepathjogbackup
- B. basespath_export
- C. basepathjogmirror
- D. basepath_databackup
Answer: A,D
NEW QUESTION 81
Which tool do you use during the Database Migration Option (DMO) procedure to monitor table splitting? Please choose the correct answer.
- A. The Observer Monitor
- B. The Process Bucket monitor
- C. The Log viewer
- D. The R3LDCTL
Answer: A
NEW QUESTION 82
Which encryption services can you activate in SAP HANA? Note: There are 3 correct answers.
- A. Data
- B. Backup
- C. Storage snapshot
- D. Pages in-memory
- E. Log
Answer: A,B,E
NEW QUESTION 83
What is the correct sequence of the following four steps when you restart the SAP HANA database system?
Please choose the correct answer.
- A. 1. Aborted transactions are rolled back.
2. Open transactions are recovered.
3. Row tables are loaded into memory.
4. Column tables are loaded. - B. 1. Row tables are loaded into memory.
2. Column tables are loaded.
3. Open transactions are recovered.
4. Aborted transactions are rolled back. - C. 1. Aborted transactions are rolled back.
2. Row tables are loaded into memory.
3. Open transactions are recovered.
4. Column tables are loaded. - D. 1. Row tables are loaded into memory.
2. Open transactions are recovered.
3. Aborted transactions are rolled back.
4. Column tables are loaded.
Answer: D
NEW QUESTION 84
Which information can you collect by running the fullSystemlnfoDump.py script when the SQL connection is available? Please choose the correct answer:.
- A. A selection of .log files
- B. A selection of rows of schema SAP<SID>
- C. A selection of .trc files
- D. A selection of rows of schema _SYS_XS
Answer: C
NEW QUESTION 85
Which of the following elements are valid rules for the location of the backup files? There are 3 correct answers to this question.
- A. The backup files should never be in the same directory and on the same file system as u data.
- B. The backup ID is unique for each persistence only.
- C. The backup folder will be created automatically when the backup process is started.
- D. The Volume ID is automatically added to a specified file name.
Answer: A,B,D
NEW QUESTION 86
Which tools can you use to start and stop an SAP HANA database? Note: There are 3 correct answers.
- A. HDB command
- B. SAP HANA cockpit
- C. SAP HANA application life cycle management (HDBLCM)
- D. DBA cockpit
- E. Sapcontrol
Answer: A,B,E
NEW QUESTION 87
Which steps can be combined in a DMO procedure, targeting an AS ABAP 7.50 based SAP system? There are
2 correct answers to this question.
- A. Performing a Unicode conversion
- B. Migrating to a target database, g. SAP HANA
- C. Performing a database upgrade of the source database
- D. Performing an SAP software update
Answer: B,D
NEW QUESTION 88
You are registering an SAP HANA database resource using SAP HANA cockpit manager. Which privileges are automatically assigned when you initially create the COCKPIT_MONITOR technical user?
There are 2 correct answers to this question.
- A. CATALOG READ
- B. SELECT on the SYS_TELEMETRY schema
- C. SELECT on the SYS_STATISTICS schema
- D. DATABSE ADMIN
Answer: A,C
NEW QUESTION 89
Which of the following users are able to start and stop a distributed SAP HANA Database System? There are 2 correct Answers to this question.
- A. ADM user
- B. ROOT user
- C. SYSTEM user
Answer: A,B
NEW QUESTION 90
Which tasks can you perform using the SAP HANA database lifecycle manager (HDBLCM) on installation media? There are 2 correct answers to this question.
- A. Uninstall SAP HANA database components.
- B. Update SAP HANA and its components.
- C. Rename the SAP HANA database system.
- D. Extract components.
Answer: B,D
NEW QUESTION 91
Which information is provided via the SUM UI? There are 3 correct answers to this question.
- A. The active roadmap step
- B. A progress bar for the overall procedure
- C. The memory consumption of SUM
- D. The content of log files via the log viewer
Answer: A,B,D
NEW QUESTION 92
Which of the following tools can be used for User Administration? There are 3 correct Answers to this question.
- A. SAP NetWeaver Identity Management
- B. Resident hdblcm
- C. SAP HANA Cockpit
- D. hdbsql
Answer: A,C,D
NEW QUESTION 93
......
Guaranteed Accomplishment with Newest Sep-2022 FREE: https://www.pass4training.com/C-HANATEC-17-pass-exam-training.html
