2022 Valid VCS-278 Real Exam Questions, practice Veritas NetBackup
Latest Success Metrics For Actual VCS-278 Exam (Updated 220 Questions)
NEW QUESTION 125
An AdvancedDisk storage unit consistently reaches capacity, causing older, staged backups to expire. How can the administrator control the prioritization of images that get removed?
- A. Use data Classification
- B. Modify Retention Levels
- C. Change the priority of relocation jobs in the staging schedule
- D. Change the priority for secondary storage lifecycle operations
Answer: B
NEW QUESTION 126
Storage Lifecycle Policy (SLP) SLP1 is used to perform a backup and duplication. The backup is always a small, 100MB backup. The master server host properties for SLP Parameters are set to the default values.
How can the administrator ensure the duplications run as soon as possible after the backup completes?
- A. reduce the "Minimum size per duplication job" setting to 50MB.
- B. right-click SLP1 and select Manual Relocation to Final Destination.
- C. increase the "Priority for secondary operations" in the SLP.
- D. reduce the "Job submission interval" setting to 0.
Answer: A
NEW QUESTION 127
A backup job is showing the following error message:
Which two actions can an administrator perform to ensure the backup completes successfully? (Select two.)
- A. Increase the ''Maximum concurrent jobs'' parameter on the Storage Unit
- B. Ensure at least one storage unit is without the On demand only option selected
- C. Increase the Multiplexing value on the Storage Unit
- D. Increase the ''Limit I/O stream'' parameter on the disk volume
- E. Assign a specific Storage Unit for that policy
Answer: B,E
NEW QUESTION 128
Refer to the exhibit.
The following Storage Lifecycle Policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired.
How should an administrator restore data from the tape using NetBackup?
- A. from the NetBackup Administration Console, promote copy 2 to the primary copy.
- B. from the NetBackup Administration Console, promote copy 1 to the primary copy.
- C. from the BAR console, start the restore and NetBackup will automatically select the tape copy.
- D. from the BAR console, select the tape backup to restore from.
Answer: A
NEW QUESTION 129
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media Server showing offline
Which command can the administrator run to status of the media server?
- A. Nbdb-admin
- B. Nbemmcmd
- C. Bptesbped
- D. bpminilicense
Answer: C
NEW QUESTION 130
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?
- A. robots
- B. ltid
- C. bptm
- D. vmd
Answer: C
NEW QUESTION 131
A backup job fails with the status code of 96. To troubleshoot the failure, the administrator wants to view the application log files written by the NetBackup Resource Broker.
Which command should the administrator run to find the date, time and message text from the log file?
- A. vxlogview -o 118 --display D,T,x
- B. vxlogview -p 51216 -d m,p,x
- C. vxlogview -o 118 --display D,T,m
- D. vxlogview -p 50936 --display D,T,m
Answer: B
NEW QUESTION 132
An administrator configures a default Standard file system backup policy, which backs up very large file systems from a set of clients. There are multiple scheduled backup attempts configured.
How can the administrator reduce the amount of time needed to complete these backup jobs after failures?
- A. configure the '"Take checkpoints every" policy setting.
- B. increase the "Job retry delay" host property setting.
- C. use the "Resume Job" action instead of "Restart Job".
- D. increase the "Client connect timeout" host property setting.
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 133
When is it most appropriate to use multiple data streams?
- A. When different backup selections are on the same disk.
- B. When performing backups over a network that is very busy.
- C. When backup up ALL_LOCAL_DRIVES to multiple tape drives.
- D. When you have very small backup jobs.
Answer: C
Explanation:
Explanation
Each tape drive can receive a data stream from a different disk.
NEW QUESTION 134
Which action is performed by the NetBackup deduplication plug-In?
- A. performing queue processing
- B. performing die fingerprinting actions
- C. processing MSDP transaction logs
- D. writing data segments into the MSDP containers
Answer: D
NEW QUESTION 135
What is device serialization?
- A. A method of reporting device errors to NetBackup.
- B. The order in which devices are configured by the wizard.
- C. A firmware feature that enables device identification and configuration.
- D. A separate interface used to configure standalone tape drives.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 136
How can an administrator check deduplication ratios in the NetBackup Administration Console, apart from the Activity Monitor?
- A. Media and Device Management > Devices > Disk Pools
- B. NetBackup Management > Storage > Storage Units
- C. NetBackup Management > Host Properties > Media Servers
- D. Media and Device Management > Credentials > Storage Servers
Answer: D
Explanation:
Explanation/Reference: https://www.veritas.com/support/en_US/doc/25074086-127355784-0/v28802759-127355784
NEW QUESTION 137
An administrator views the following errors from the Detailed Status tab of a failed job in the Activity Monitor.
Which command should the administrator perform to test the communication between the master server and the client based on the output?
- A. bptestnetconn -s
- B. nbdb_ping
- C. bpclntcmd -self
- D. bptestbpcd
Answer: A
NEW QUESTION 138
Which volume pool holds cleaning media?
- A. DataStore
- B. Scratch
- C. NetBackup
- D. None
Answer: D
NEW QUESTION 139
An administrator navigates to Netbackup Management > catalog and selects Action: Import. After clicking the Search How button, the following messages appears:
INF _FOUND no images matching the selection criteria that were ready for phase 2 import.
Which step must the administrator perform in order to get search results?
- A. Increase the ''Catalog cleanup wait time'' in the Clean-up host property.
- B. Run the '' Recover the catalog wizard
- C. Enable catalog > Overrode default priority, and increase the job Priority value
- D. Run the initiate import command in the catalog > Action menu
Answer: D
NEW QUESTION 140
What is in the Backup Selections list for an Oracle backup policy?
- A. The file names of the transaction logs
- B. The file names of all files using by Oracle
- C. The device names or drive letters of the disks
- D. A script to be interpreted by Oracle
Answer: D
Explanation:
Explanation
The technique is also common to other databases, such as Microsoft SQL server.
NEW QUESTION 141
Which method is NOT able to provide performance information for previously run backup jobs?
- A. Running nbperfehk on the command line
- B. Running the All Log Entries report
- C. Viewing the Disk tape Deice Activity report in the activity Monitor
- D. Viewing then detailed status of the job details in the Activity Monitor
Answer: A
NEW QUESTION 142
A windows policy protects over 100 servers using the directive ALL-LOCAL DRIVERS. The backup windows for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which settings should the administrator modify to ensure only ten jobs write concurrently the disk storage unit during the backup window?
- A. Set the ''Allow multiple data streams'' policy attribute
- B. Enable the ''Limit Jobs per client'' host property
- C. Enable the Limit Jobs per policy'' attribute
- D. Enable multiplexing for the storage unit and set the value
Answer: C
NEW QUESTION 143
Which of the following statements about block level incremental backups (BLIB) is correct?
- A. They can speed up backups of Exchange servers.
- B. They enable restore of individual objects for Exchange.
- C. They enable restore of individual objects for Oracle.
- D. They can speed up backups of Oracle databases.
Answer: D
Explanation:
Explanation
Block level incremental backups (BLIB) backs up changed data for Oracle. This method does not apply to Exchange.
NEW QUESTION 144
......
Genuine VCS-278 Exam Dumps Free Demo Valid QA's: https://www.pass4training.com/VCS-278-pass-exam-training.html
