HP HPE2-T37 Exam Info and Free Practice Test | Pass4training
Pass HP HPE2-T37 Premium Files Test Engine pdf - Free Dumps Collection
HPE2-T37 exam is intended for IT professionals who have experience with HPE infrastructure and want to demonstrate their skills in using HPE OneView. HPE2-T37 exam is also suitable for IT professionals who are responsible for managing HPE infrastructure and want to improve their skills in using HPE OneView. Passing the HPE2-T37 exam will demonstrate your expertise in using HPE OneView and will help you advance in your career.
NEW QUESTION # 31
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset BIOS settings to the defaults so UEFI settings can be applied
- B. reset an il_0 management processor to activate the new boot mode for the server
- C. reset BIOS settings to the defaults through the server profile after changing the boot mode
- D. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
Answer: D
NEW QUESTION # 32
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION # 33
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Snapshot functionality will be limited only to the volumes not using these SANs.
- B. Volume presentation through server profile will work with the discovered state.
- C. Auto-zoning functionality will not work until SANs are associated with networks.
- D. Volume provisioning will only work for arrays that ate accessible through these SANs.
Answer: B
NEW QUESTION # 34
What is required to add remote frame link topology to HPE OneView?
- A. Management ports of the remote frame link topology must be connected to the management LAN.
- B. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available.
What is a possible reason?
- A. Firmware on the master modules is too low to support highly available setup.
- B. Some master modules only support a redundant setup.
- C. A dedicated license must be added to HPE OneView to enable this feature.
- D. There are not sufficient frames for highly available setup.
Answer: B
NEW QUESTION # 36
Which statement about the presented storage pools is true?
- A. All storage pools in managed state have a valid HPE OneView license applied
- B. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
- C. Storage pools in discovered state can be removed from HPE OneView.
- D. HPE OneView can be used to configure replication only between managed storage pools
Answer: B
NEW QUESTION # 37
Where is the association between an HPE OneView network and uplink port defined?
- A. Within an HPE OneView network definition
- B. At the network set level
- C. Within an Enclosure Group definition
- D. At the Logical Interconnect Group level
Answer: D
NEW QUESTION # 38
For which HPE OneView resource can manual orchestration method be used when updating the firmware?
- A. Logical interconnect
- B. Frame Link Module
- C. Logical enclosure
- D. Server profile
Answer: D
NEW QUESTION # 39
what is required to add a remote frame to the primary management ring?
- A. Request code from the primary HPE Composer
- B. Remote frame Link Module IPv6 address
- C. UUD of the remote HPE Composer
- D. Serial number of one of the remote frames
Answer: A
NEW QUESTION # 40
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- C. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- D. The maximum supported number of the internal networks for logical interconnect is configured.
Answer: B
NEW QUESTION # 41
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
NEW QUESTION # 42
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Run the Update Readiness checker tool to evaluate HPE OneView health status
- B. Create a support dump for the appliance and for all managed logical interconnects
- C. Disable HPE Remote Support at toe HPE OneView appliance level
- D. Put all servers managed through HPE OneView to maintenance state
Answer: A
NEW QUESTION # 43
Which statement regarding HPE OneView backup restore is true?
- A. During backup restore, users with Administrator privileges can still login to HPE OneView
- B. Users with Backup Administrator privileges can restore an HPE OneView backup
- C. Only users with Infrastructure Administrator privileges can restore an HPE OneView backup
- D. An HPE OneView backup can be used to restore individual components like server profile
Answer: A
NEW QUESTION # 44
Which licenses are optional to be purchased separately for HPE Synergy?
- A. Global Dashboard licenses
- B. HPE OneView licenses
- C. Virtual Connect licenses
- D. FC Upgrade licenses
Answer: D
Explanation:
Licenses were not purchased in the original order for the modules and were ordered separately.
NEW QUESTION # 45
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. The Compute Module profile must have exactly two connections defined.
- B. Both FlexNlCs must be connected to the same network.
- C. The sFlow option must be enabled and configured.
- D. An upgrade license must be purchased and deployed.
Answer: B
NEW QUESTION # 46
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 47
......
HPE OneView platform is a powerful infrastructure management tool that enables IT professionals to simplify their infrastructure management tasks. It provides a unified interface for managing servers, storage, and networking resources across multiple data centers, allowing IT staff to have a holistic view of their infrastructure. The HPE OneView platform also automates routine tasks, reducing the workload of IT staff and improving operational efficiency.
Updated Official licence for HPE2-T37 Certified by HPE2-T37 Dumps PDF: https://www.pass4training.com/HPE2-T37-pass-exam-training.html
New 2025 Realistic HPE2-T37 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1Gel9aT-xzK16SN5S3T9fhJsWRmPjlGR_
