[Jan 08, 2022] 350-601 Test Engine files, 350-601 Dumps PDF
Latest Cisco 350-601 PDF and Dumps (2022) Free Exam Questions Answers
Target Audience for Cisco 350-601 Exam
The Cisco 350-601 exam is developed mainly for those specialists who perform the implementation of core data center technologies, including storage network, network, compute, security, and automation. To ace this test, the students need to show that they have the ability to identify products in the Cisco MDS and Cisco Data Center Nexus families and also possess the professional familiarity with hypervisor technologies such as VMware. In addition, the candidates are required to have familiarity with SANs, Fiber Channel protocol, and Ethernet and TCP/IP networking. They also need to show that they have a deep understanding of the Cisco Enterprise Data Center architecture and server system architecture and design.
NEW QUESTION 72
Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Nexus 7000 Series Switch is deployed?
- A. Open Agent Container
- B. NX-API
- C. LLDP
- D. Bash shell
Answer: B
Explanation:
Section: Automation
NEW QUESTION 73
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>
NEW QUESTION 74
Refer to the exhibit.
Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?
- A. Enable the DHCP relay agent.
- B. Configure the interface of the DHCP server as untrusted.
- C. Verify the DHCP snooping bindings.
- D. Configure the IP address of the DHCP server.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/dcnm/security/configuration/guide/sec_dcnm
NEW QUESTION 75
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.
Which method does Cisco recommend to configure the SAN boot?
- A. Define the vHBAs as bootable and leave the default values on the boot target definition.
- B. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
- C. Define the vHBAs as bootable and leave the boot target definition empty.
- D. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
Answer: D
Explanation:
Section: Storage Network
NEW QUESTION 76
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
NEW QUESTION 77
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 78
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION 79
An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)
- A. server-profile
- B. network-admin
- C. enable
- D. admin
- E. operations
Answer: B,D
NEW QUESTION 80
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. adapters
- B. BIOS
- C. IOMs
- D. Cisco UCS Manager
- E. board controller
Answer: B,E
Explanation:
Explanation
NEW QUESTION 81
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)
- A. frames that were sent on the link and received
- B. frames that were sent on the link but not yet received
- C. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender
- D. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender
- E. frames that were sent with high credit
Answer: B,C
NEW QUESTION 82
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 83
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 anycast address
- B. IPv4 gateway address
- C. IPv4 multicast address
- D. IPv4 unicast address
Answer: D
NEW QUESTION 84
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaLogout
- B. POST to aaaLogin
- C. POST to aaaRefresh
- D. GET to aaaListDomains
Answer: B
NEW QUESTION 85
A host in EPG Client wants to talk to a webserver in EPG Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80.
Which statement is true?
- A. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- B. The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver can initiate a separate TCP connection to a host port with TCP source port 80.
- C. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
- D. The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be able to initiate a separate TCP connection to a host port with TCP source port 80.
Answer: B
NEW QUESTION 86
Refer to the exhibit.
Which two statements describe the routing table of the leaf switch? (Choose two.)
- A. The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in ACI.
- B. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- C. 10.20.1.0/24 is a BD subnet in ACI.
- D. The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in ACI.
- E. 172.16.100.0/24 is a BD subnet in ACI.
Answer: C,D
NEW QUESTION 87
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION 88
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
NEW QUESTION 89
An engineer must configure SAN connectivity in Cisco UCS manager. The requirement is to specify the WWPN of the storage array and set the zoning type to single initiator multiple targets. The engineer must also configure interrupt handling and queues of the vHBA interface. Which two Cisco UCS policies should be used to configure the settings? (Choose two.)
- A. SAN connectivity policy
- B. storage connection policy
- C. boot policy
- D. vHBA policy
- E. Fibre Channel adapter policy
Answer: B,E
NEW QUESTION 90
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?
- A. servers
- B. service profiles
- C. roles
- D. systems
Answer: B
Explanation:
Section: Compute
Explanation/Reference:
NEW QUESTION 91
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?
- A. The last role assigned takes precedence over previous roles.
- B. Access to a command takes priority over being denied access to a command.
- C. Any commands that have conflicting settings between roles are denied.
- D. The first role assigned takes precedence over subsequent roles.
Answer: B
NEW QUESTION 92
Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.
Answer:
Explanation:
NEW QUESTION 93
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Answer:
Explanation:
Explanation
2,4,5 - NAS 1,3 - SAN
NEW QUESTION 94
......
An In-depth Look at the Exam Domains
The Cisco 350-601 exam has a 120-minute duration. It is administered by Pearson VUE, are candidates should register for it on the company's website. The questions one will face relate to the following domains:
- Automation
Of all the test objectives, automation covers the least sub-topics. It assesses one's knowledge of automation and scripting tools as well as orchestration technologies. Here, you must have some background experience working with a ton of data center networking products such as Ansible, Puppet, POAP, PowerShell, DCNM, REST API, and EEM, among the rest.
- Compute
This is another broad topic that emphasizes the skills in implementing Cisco Unified Compute System Blade Chassis, Cisco UCS Rack Servers, compute configuration management, and infrastructure monitoring, including Intersight and SPAN. Besides, it also addresses firmware and software updates and their effects on C-series and B-series servers, and mastery of the benefits of HyperFlex Infrastructure Concepts.
- Network
Conversely, this domain will address the concepts such as the application of routing protocols, switching protocols like LACP, vPC, and RSTP+, and overlay protocols, including VXLAN EVPN and OTV. Furthermore, the questions under this module will confirm the applicant's understanding of packet flow and cloud service analysis, understanding of the updates for software and their effects, the implementation of the network configuration management, infrastructure monitoring, and the concepts of network assurance.
- Security
Security as part of the Cisco data center technologies requires candidates to be skilled in the application of security for networks, computing solutions, and storage. Under this section, one also should demonstrate familiarity with the AAA and RBAC, keychain authentication, fabric binding, port security, and CoPP, among others.
- Storage Network
This domain focuses on the 5 key skills, including the implementation of Fibre Channel, FCoE Unified Fabric (FIP and DCB), and NFS as well as NAS concepts. What's more, it will confirm if you understand the concepts of software updates and their effects and the implementation of infrastructure monitoring.
Pass Your CCNP Data Center 350-601 Exam on Jan 08, 2022 with 139 Questions: https://www.pass4training.com/350-601-pass-exam-training.html
350-601 Free Exam Study Guide! (Updated 139 Questions): https://drive.google.com/open?id=1UcOPwFmvlawO6YR5s3XeaxLRjKfh0kqt
