MikroTik New 2024 MTCNA Sample Questions Reliable MTCNA Test Engine
Feel MikroTik MTCNA Dumps PDF Will likely be The best Option
The MTCNA certification is a globally recognized credential that demonstrates the holder's expertise in MikroTik routers and wireless networks. MikroTik Certified Network Associate Exam certification is valid for three years and can be renewed by taking a recertification exam. Additionally, the certification program offers a pathway to advanced certifications, such as the MikroTik Certified Network Professional (MTCNP) and the MikroTik Certified Routing Engineer (MTCRE). Overall, the MikroTik MTCNA Exam is an excellent certification program for networking professionals who want to enhance their skills and advance their careers.
MikroTik MTCNA certification program is an excellent option for network engineers who want to enhance their skills and knowledge in managing MikroTik routers and wireless systems. It is a comprehensive program that covers all aspects of network management and is recognized globally by the networking industry.
MikroTik MTCNA certification is a valuable credential for network professionals seeking to advance their careers in the networking industry. MikroTik Certified Network Associate Exam certification validates that the candidate has the necessary knowledge and skills to deploy and manage MikroTik networks effectively. MikroTik Certified Network Associate Exam certification is recognized globally and provides opportunities for professionals to work in different industries such as telecommunications, internet service providers, and data centers.
NEW QUESTION # 47
Consider the following diagram. We want to communicate from a device on LAN1 to a device on LAN2.
Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?
- A. /ip route add dst-address=0.0.0.0/0 gateway=Ether1
- B. /ip route add dst-address=192.168.0.0/24 gateway=192.168.0.1
- C. /ip route add dst-address=0.0.0.0/0 gateway=192.168.99.2
- D. /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2
- E. /ip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24 gateway=192.168.99.2
Answer: D
NEW QUESTION # 48
What is term for the hardware coded address found on an interface?
- A. MAC Address
- B. IP Address
- C. Interface Address
- D. FQDN Address
Answer: A
NEW QUESTION # 49
Which are necessary sections in /queue simple to set bandwidth limitation?
- A. max-limit
- B. target-address, dst-address, max-limit
- C. target-address, dst-address
- D. target-address, max-limit
Answer: D
NEW QUESTION # 50
Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.
- A. true
- B. false
Answer: B
NEW QUESTION # 51
Which of these are possible solutions to bridge two networks over a wireless link:
- A. One device in AP mode, another one in station-pseudobridge-clone
- B. Both devices in AP mode and enable WDS mode
- C. One device in AP mode, another one in station-pseudobridge
- D. One device in AP mode, another one in station
Answer: B
NEW QUESTION # 52
Destination NAT (chain dstnat, action dst-nat) can be used to:
- A. Change destination port
- B. Direct users from the Internet to a server within your local network
- C. Change source port
- D. Hide your local network from the Internet
Answer: A
NEW QUESTION # 53
What is the main reason the OSI model was created?
- A. So application developers can change only one layer's protocols at a time.
- B. So different networks could communicate.
- C. So Cisco could use the model.
- D. To create a layered model larger than the DoD model.
Answer: B
NEW QUESTION # 54
Which one of the following is true regarding VLANs?
- A. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.
- B. You should not have more than 10 switches in the same VTP domain.
- C. VTP is used to send VLAN information to switches in a configured VTP domain.
- D. Two VLANs are configured by default on all Cisco switches.
Answer: C
NEW QUESTION # 55
To back up an IOS, what command will you use?
- A. copy ios tftp
- B. copy tftp flash
- C. backup IOS disk
- D. copy flash tftp
Answer: D
NEW QUESTION # 56
To block communications between wireless clients connected to the same access point interface, you should set
- A. 'max-station-count=1'
- B. 'default-authentication=no'
- C. 'default-authentication=no' and 'default-forwarding=no'
- D. 'default-forwarding=no'
Answer: D
NEW QUESTION # 57
How many wireless clients can connect, when wireless card is configured to mode=bridge?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 58
Please select valid scan-list values in interface wireless configuration:
- A. 5640~5680
- B. 5540,5560,5620+5700
- C. 5560,5620-5700
- D. default,5560,5600,5660-5700
Answer: C,D
NEW QUESTION # 59
Which of the following are layers in the TCP/IP model?
Application
Session
Transport
Internet
Data Link
Physical
- A. 2, 3 and 5
- B. 1 and 2
- C. 3, 4 and 5
- D. 1, 3 and 4
Answer: D
NEW QUESTION # 60
What does a VLAN do?
- A. Acts as the fastest port to all servers.
- B. Breaks up broadcast domains in a layer 2 switch internetwork.
- C. Provides multiple broadcast domains within a single collision domain.
- D. Provides multiple collision domains on one switch port.
Answer: B
NEW QUESTION # 61
Which firewall chain should you use to filter clients HTTP traffic going through the router?
- A. output
- B. input
- C. forward
- D. prerouting
Answer: C
NEW QUESTION # 62
In which situations can Netinstall NOT be used to install a RouterBOARD?
- A. You do not know the password of the router
- B. The router is connected only to a wireless network
- C. The router does not have an operating system
- D. The router is connected only to a secondary Ethernet port
Answer: B,D
NEW QUESTION # 63
Where can you monitor (see addresses and ports) real-time connections which are processed by the router?
- A. Queue Tree
- B. Firewall Connection Tracking
- C. Firewall Counters
- D. Tool Torch
Answer: B,D
NEW QUESTION # 64
What is necessary for PPPoE client configuration?
- A. ip firewall nat masquerade rule
- B. Static IP address on PPPoE client interface
- C. Interface (on which PPPoE client is going to work)
Answer: C
NEW QUESTION # 65
Which firewall chain should you use to filter ICMP packets from the router itself?
- A. output
- B. forward
- C. postrouting
- D. input
Answer: D
NEW QUESTION # 66
......
Use Valid New MTCNA Test Notes & MTCNA Valid Exam Guide: https://www.pass4training.com/MTCNA-pass-exam-training.html
MTCNA exam torrent MikroTik study guide: https://drive.google.com/open?id=1hs36_u8wo0iB0QckQKi6Nr-a18W2MJVu
