New (2021) Cisco 300-430 Exam Dumps
Best Way To Study For Cisco 300-430 Exam Brilliant 300-430 Exam Questions PDF
The benefit of obtaining the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam Certification
The Cisco enterprise wireless networks test is not simpler and unless well prepared, can prove to be a very tough exam. If competent 300-430 exam dumps are researched and evaluated on 300-430 practice exams, the exam difficulty can be reduced. The benefits are listed below:
- Cisco certified professionals can manage complex projects and issues
- Cisco certifications improve earning
- Cisco certifications enhance the credibility of certified professionals
- Cisco certifications improve career prospects
- When a company recruits or promotes an employee, human resources are responsible for the decision. Now, although applicants may have an IT history, they make their decisions in a way that records several different variables. One thing is that applicants, like the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks certified, have formal qualifications.
- Cisco certified professionals can provide a higher level of customer satisfaction
- If the applicant has the desire to transfer into a company to a higher-paying role. As always, this credential will help.
- Cisco certifications improve job productivity
The 300-430 exam certifies your knowledge of implementing service provider advanced routing technologies including routing protocols, policy language, MPLS, and segment routing. After you pass 300-430, you earn the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification, and you satisfy the concentration exam requirement for the CCNP Service Provider certification.
Monitoring
This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:
- Utilizing reports on Cisco DNA Center and PI;
- Managing rogues and alarms;
- Troubleshooting the client’s connectivity.
- Managing RF interferers;
Cisco 300-430 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
NEW QUESTION 43
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
- C. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- D. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
Answer: A
Explanation:
NEW QUESTION 44
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION 45
An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtend has been implement. The wireless connectivity is working, but users report losing connectivity to their local network printers. Which solution must be used to address this issue?
- A. OEAP split tunnel
- B. FlexConnect local switching
- C. WLAN static IP tunneling
- D. OEAP gateway override
Answer: A
NEW QUESTION 46
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?
- A. AAA override
- B. CCKM/OKC
- C. VLAN name override
- D. FlexConnect ACL
Answer: A
NEW QUESTION 47
Refer to the exhibit.
A wireless engineer has integrated the wireless network with a RADIUS server. Although the configuration on the RADIUS is correct, users are reporting that they are unable to connect. During troubleshooting, the engineer notices that the authentication requests are being dropped. Which action will resolve the issue?
- A. Provide a valid client username that has been configured on the RADIUS server.
- B. Allow connectivity from the wireless controller to the IP of the RADIUS server.
- C. Authenticate the client using the same EAP type that has been set up on the RADIUS server.
- D. Configure the shared-secret keys on the controller and the RADIUS server.
Answer: B
NEW QUESTION 48
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION 49
An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOS controller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL, is applied to the corporate_clients interface on the WLC, which is used for all corporate clients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resources group policy. What is the resulting ACL when a Human Resources user connects?
- A. BASE_ACL appended with HR_ACL
- B. BASE_ACL only
- C. HR_ACL only
- D. HR_ACL appended with BASE_ACL
Answer: C
NEW QUESTION 50
What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?
- A. supplicant credentials
- B. TACACS server IP address.
- C. RADIUS shared secret
- D. local access point credentials
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-fixed/107946-LAP-802-1x.html
NEW QUESTION 51
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?
- A. AAA override
- B. CCKM/OKC
- C. VLAN name override
- D. FlexConnect ACL
Answer: A
Explanation:
NEW QUESTION 52
Which three characteristics of a rogue AP pose a high security risk? (Choose three.)
- A. low RSSI
- B. foreign SSID
- C. open authentication
- D. accepts clients
- E. distant location
- F. high RSSI
Answer: B,C,D
NEW QUESTION 53
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. connect and engage
- B. presence
- C. detect and locate.
- D. analytics
Answer: C
Explanation:
NEW QUESTION 54
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
- A. EAP-TLS with 802.1x port authentication
- B. EAP-FAST with CAPWAP DTLS
https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/1612/configguide/ewc_cg_16_12/802_1x_support.pdf - C. EAP-FAST with CAPWAP DTLS + port authentication
- D. EAP-PEAP with 802.1x port authentication
Answer: C
NEW QUESTION 55
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION 56
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Interference Devices reports on Cisco Wireless LAN Controller
- B. Air Quality reports on Cisco Wireless LAN Controller
- C. CleanAir reports on Cisco Prime Infrastructure
- D. Performance reports on Cisco Prime Infrastructure
Answer: C
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR14.pdf
NEW QUESTION 57
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Interference Devices reports on Cisco Wireless LAN Controller
- B. Air Quality reports on Cisco Wireless LAN Controller
- C. CleanAir reports on Cisco Prime Infrastructure
- D. Performance reports on Cisco Prime Infrastructure
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR1
NEW QUESTION 58
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The user is using invalid credentials.
- B. The Cisco WLC is configured for the incorrect date.
- C. The client is falling to accept certificate.
Answer: C
NEW QUESTION 59
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 60 seconds
- B. 30 seconds
- C. 15 seconds
- D. 10 seconds
Answer: C
Explanation:
NEW QUESTION 60
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives SNMP traffic from the WLC.
- B. The Cisco CMX server receives NMSP traffic from the WLC.
- C. The Cisco CMX server receives NetFlow data from the WLC.
- D. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
Answer: D
NEW QUESTION 61
......
Updated Verified Pass 300-430 Exam - Real Questions & Answers: https://www.pass4training.com/300-430-pass-exam-training.html
Dumps Moneyack Guarantee - 300-430 Dumps Approved Dumps: https://drive.google.com/open?id=161G--REoTPyG24RFQePWoNjPYKKQB9Fy
