[Oct-2021] Pass Cisco 300-630 Exam in First Attempt Guaranteed!
Full 300-630 Practice Test and 78 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 10
An organization deploys active-active data centers and active-standby firewalls in each data center. Which action should be taken in a Cisco ACI Multi-Pod to maintain traffic symmetry through the firewalls?
- A. Enable Endpoint Dataplane Learning
- B. Enable Pod ID Aware Redirection
- C. Disable service node Health Tracking
- D. Disable Resilient Hashing
Answer: C
Explanation:
Section: Multipod
NEW QUESTION 11
An engineer must limit local and remote endpoint learning to the bridge domain subnet. Which action should be taken inside the Cisco APIC?
- A. Disable Endpoint Dataplane Learning
- B. Enable Enforce Subnet Check
- C. Enable Limit IP Learning to Subnet
- D. Disable Remote EP Learn
Answer: B
NEW QUESTION 12 
Refer to the exhibit. A customer experiences resource overconsumption on one of its border leaf switches.
Which action should be taken to reduce the consumption on this switch?
- A. Migrate L3Outs to another switch
- B. Disable VRF Policy Control Enforcement
- C. Disable Remote EP Learning
- D. Disable IP Data Plane Learning
Answer: D
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 13
An engineer deploys a Cisco ACI Multi-Site Orchestrator for the first time. Drag and drop the actions from the left into the steps on the right to add a site and deploy new Cisco ACI objects to the fabric. Not all actions are used.
Answer:
Explanation:
NEW QUESTION 14
Which two components must be configured as stretched to establish intra-VRF communication between two EPGs that are deployed in different sites and different bridge domains? (Choose two.)
- A. EPG
- B. bridge domain
- C. tenant
- D. application profile
- E. contract
Answer: A,B
Explanation:
Section: Advanced ACI Policies and Integrations
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739609.html
NEW QUESTION 15
Refer to the exhibit.
An engineer wants to avoid connectivity problems for the endpoint EP1 when it reaches an external L3Out network through the gateway 10.2.2.254/24. Which two configurations must be implemented in BD-BD2? (Choose two.)
- A. Enable ARP flooding
- B. Disable unicast routing
- C. Enable unicast routing
- D. Enable IP data plane learning for the VRF
- E. Disable ARP flooding
Answer: B,E
NEW QUESTION 16 
Refer to the exhibit. An engineer extends a Cisco ACI Multi-Pod setup to a Cisco ACI Multi-Site implementation. Which action allows the interconnection?
- A. Connect all spines to the IPN and ISN
- B. Configure BIDIR-PIM in the IPN and ISN
- C. Use dedicated uplinks on Site 1 spines for ISN connections
- D. Filter the advertisement of the Site 2 TEP pool into the IPN
Answer: B
Explanation:
Section: Multisite
NEW QUESTION 17
An engineer created a Cisco ACI environment in which multiple tenants reuse the same contract. The requirement is to prevent inter-tenant communication. Which action meets this requirement?
- A. Create the contract in the common tenant with the scope set to Global
- B. Create the contract in the user tenant with the scope set to VRF and exported to other tenants
- C. Create the contract in the user tenant with the scope set to Global and exported to other tenants
- D. Create the contract in the common tenant with the scope set to Tenant
Answer: D
NEW QUESTION 18 
Refer to the exhibit. Which configuration must be implemented to allow intra-VRF transit routing between the two external routers?
- A. Modify L3Out 1 to use the same OSPF area as L3Out 2
- B. Change one of the areas to area 0
- C. Deploy both areas under the same L3Out policy
- D. Configure OSPF virtual links
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 19
Cisco ACI fabric is migrated from network-centric mode to application-centric mode. What is possible in an application-centric design?
- A. creation of additional EPGs under one bridge domain
- B. Cisco ACI VMM integration with hypervisors
- C. remapping of VLAN pools
- D. migration of bare metal servers to virtual machines
Answer: A
Explanation:
Section: Traditional network with ACI
Explanation/Reference:
NEW QUESTION 20
An engineer deployed a Cisco ACI fabric and noticed that the fabric learns endpoints from subnets that are not configured on a bridge domain. To meet strict security requirements, the engineer must prevent this behavior. Which action must be taken to prevent this behavior?
- A. Configure Static Binding
- B. Activate Enable Data Plane Endpoint Learning
- C. Enable Enforce Subnet Check
- D. Implement Pervasive Gateway
Answer: C
NEW QUESTION 21
A leaf receives unicast traffic that is destined to an unknown source, and spine proxy is enabled in the corresponding bridge domain. Drag and drop the Cisco ACI forwarding operations from the left into the order the operation occurs on the right.
Answer:
Explanation:
NEW QUESTION 22
What are two characteristics of Cisco ACI interaction with MSTP? (Choose two.)
- A. A Cisco ACI leaf flushes all local endpoints in the received EPG when an MSTP TCN frame is received.
- B. A static path binding is required for native VLAN to carry the MST BPDUs in existing EPGs.
- C. Mis-cabling protocol is used to snoop the MSTP TCN packets.
- D. The PVST simulation must be configured on external network switches to support MSTP.
- E. A dedicated EPG must be created for the native VLAN ID with static bindings toward the MSTP-enabled switches.
Answer: C,E
NEW QUESTION 23
Which action must be taken to connect two nonsilient servers in active/standby mode to two ACI leaves?
- A. Disable dataplane learning to avoid endpoint flapping
- B. Enable ARP flooding for the bridge domain if the MAC address of the active interface changes after NIC failover
- C. Configure ARP flooding for the bridge domain if the MAC address of the active interface stays identical after a NIC failover
- D. Implement a virtual PortChannel on ACI leaves
Answer: C
NEW QUESTION 24
Refer to the exhibit.
What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?
- A. contract filter to allow ARP and HTTP
- B. contract with no filter
- C. precise filter to allow only HTTP traffic
- D. permit-all contract filter
Answer: A
NEW QUESTION 25
An organization expands a Cisco ACI Multi-Pod from two to six pods and must ensure that the control plane scales. What should be configured in the IPN to ensure that BUM traffic is forwarded efficiently across the IPN?
- A. MP-BGP
- B. MSDP
- C. spine headend replication
- D. BIDIR-PIM
Answer: D
NEW QUESTION 26 
Refer to the exhibit. What must be configured to allow the PBR node (LB-int) to monitor the availability of the endpoint that is in the EPG server?
- A. Direct Connect in the service graph template
- B. Unicast Route disabled for client and server bridge domains
- C. Endpoint Dataplane Learning
- D. PBR node tracking
Answer: C
Explanation:
Section: ACI Packet Forwarding
NEW QUESTION 27
An engineer deploys a Cisco ACI Multi-Site Orchestrator for the first time. Drag and drop the actions from the left into the steps on the right to add a site and deploy new Cisco ACI objects to the fabric. Not all actions are used.
Answer:
Explanation:
NEW QUESTION 28
Drag and drop the tenant implementation designs from the left onto the outcomes of the design when a greenfield Cisco ACI fabric is deployed on the right.
Answer:
Explanation:
NEW QUESTION 29
Which two components must be configured as stretched to establish intra-VRF communication between two EPGs that are deployed in different sites and different bridge domains? (Choose two.)
- A. EPG
- B. bridge domain
- C. tenant
- D. application profile
- E. contract
Answer: A,B
NEW QUESTION 30
Which feature should be disabled on a bridge domain when a default gateway for endpoints is on an external device instead of a Cisco ACI bridge domain SVI?
- A. unicast routing
- B. ARP flooding
- C. proxy ARP
- D. unknown unicast flooding
Answer: D
NEW QUESTION 31
A cloud provider must make a pair of firewalls available to all tenants. Each tenant defines its own service graph. Where should the Layer 4 to Layer 7 service be configured to accomplish this goal?
- A. common tenant
- B. management tenant
- C. user tenant
- D. infrastructure tenant
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
Explanation
NEW QUESTION 32
......
Prepare for your Cisco certification with the updated Pass4training 300-630 exam questions: https://drive.google.com/open?id=1qL2unExehRJyrTlAVWUprwD5knaUD6dB
Get Latest 300-630 Dumps Exam Questions in here: https://www.pass4training.com/300-630-pass-exam-training.html
