PCNSE Free Certification Exam Easy to Download PDF Format 2026
Get 100% Success with Latest PCNSE PAN-OS PCNSE Exam Dumps
NEW QUESTION # 82
An administrator needs to identify which NAT policy is being used for internet traffic.
From the Monitor tab of the firewall GUI, how can the administrator identify which NAT policy is in use for a traffic flow?
- A. Click App Scope > Network Monitor and filter the report for NAT rules.
- B. Click Traffic view and review the information in the detailed log view.
- C. Click Traffic view; ensure that the Source or Destination NAT columns are included and review the information in the detailed log view.
- D. Click Session Browser and review the session details.
Answer: D
Explanation:
Traffic view in the Monitor tab of the firewall GUI can display the information about the NAT policy that is in use for a traffic flow, if the Source or Destination NAT columns are included and reviewed in the detailed log view1. The Source NAT column shows the translated source IP address and port, and the Destination NAT column shows the translated destination IP address and port2. These columns can help the administrator identify which NAT policy is applied to the traffic flow based on the pre-NAT and post-NAT addresses and ports.
NEW QUESTION # 83
A organizations administrator has the funds available to purchase more firewalls to increase the organization's security posture.
The partner SE recommends placing the firewalls as close as possible to the resources that they protect Is the SE's advice correct and why or why not?
- A. No Placing firewalls m front of perimeter DDoS devices provides greater protection tor sensitive devices inside the network
- B. Yes Firewalls are session based so they do not scale to millions of CPS
- C. No Firewalls provide new defense and resilience to prevent attackers at every stage of the cyberattack lifecycle independent of placement
- D. Yes Zone Protection profiles can be tailored to the resources that they protect via the configuration of specific device types and operating systems
Answer: C
NEW QUESTION # 84
An administrator cannot see any Traffic logs from the Palo Alto Networks NGFW in Panorama reports. The configuration problem seems to be on the firewall Which settings, if configured incorrectly, most likely would stop only Traffic logs from being sent from the NGFW to Panorama?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 85
An Administrator is configuring an IPSec VPN toa Cisco ASA at the administrator's home and experiencing issues completing the connection. The following is th output from the command:
less mp-log ikemgr.log:
What could be the cause of this problem?
- A. The Proxy IDs on the Palo Alto Networks Firewall do not match the settings on the ASA.
- B. The public IP addresse do not match for both the Palo Alto Networks Firewall and the ASA.
- C. The deed peer detection settings do not match between the Palo Alto Networks Firewall and the ASA
- D. The shared secerts do not match between the Palo Alto firewall and the ASA
Answer: A
NEW QUESTION # 86
Which three options does the WF-500 appliance support for local analysis? (Choose three)
- A. PNG files
- B. APK files
- C. E-mail links
- D. jar files
- E. Portable Executable (PE) files
Answer: C,D,E
NEW QUESTION # 87
Which template values will be configured on the firewall if each template has an SSL to be deployed. The template stack should consist of four templates arranged according to the diagram.
Which template values will be configured on the firewall if each template has an SSL/TLS Service profile configured named Management?
- A. Values in Datacenter
- B. Values in Chicago
- C. Values in efwOlab.chi
- D. Values in Global Settings
Answer: B
Explanation:
The template stack should consist of four templates arranged according to the diagram. The template values that will be configured on the firewall if each template has an SSL/TLS Service profile configured named Management will be the values in Chicago. This is because the SSL/TLS Service profile is configured in the Chicago template, which is the highest priority template in the stack. The firewall will inherit the settings from the highest priority template that has the setting configured, and ignore the settings from the lower priority templates that have the same setting configured. Therefore, the values in Datacenter, efwOlab.chi, and Global Settings will not be applied to the firewall. Reference:
[Manage Templates and Template Stacks]
[Template Stack Configuration]
[Template Stack Priority]
NEW QUESTION # 88
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch port which it connects.
How would an administrator configure the interface to 1Gbps?
- A. set deviceconfig system speed-duplex 1Gbps-full-duplex
- B. set deviceconfig system speed-duplex 1Gbps-duplex
- C. set deviceconfig Interface speed-duplex 1Gbps-half-duplex
- D. set deviceconfig interface speed-duplex 1Gbps-full-duplex
Answer: B
Explanation:
Explanation/Reference:
Reference: https://live.paloaltonetworks.com/t5/Configuration-Articles/How-to-Change-the-Speed-and- Duplex-of-the-Management-Port/ta-p/59034
NEW QUESTION # 89
An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against external hosts attempting to exploit a flaw in an operating system on an internal system.
Which Security Profile type will prevent this attack?
- A. URL Filtering
- B. Anti-Spyware
- C. Vulnerability Protection
- D. Antivirus
Answer: C
Explanation:
Reference:
https://www.paloaltonetworks.com/documentation/71/pan-os/web-interface-help/objects/objects-security-profiles- vulnerability-protection
NEW QUESTION # 90
Which event will happen if an administrator uses an Application Override Policy?
- A. The application name assigned to the traffic by the security rule is written to the Traffic log.
- B. App-ID processing time is increased.
- C. The Palo Alto Networks NGFW stops App-ID processing at Layer 4.
- D. Threat-ID processing time is decreased.
Answer: C
Explanation:
Reference:
https://live.paloaltonetworks.com/t5/Learning-Articles/Tips-amp-Tricks-How-to-Create-an-Application-Override
https://docs.paloaltonetworks.com/pan-os/7-1/pan-os-admin/app-id/manage-custom-or-unknown- applications#
NEW QUESTION # 91
Which three split tunnel methods are supported by a globalProtect gateway? (Choose three.)
- A. video streaming application
- B. URL Category
- C. Source Domain
- D. Destination Domain
- E. Client Application Process
- F. Destination user/group
Answer: A,D,E
NEW QUESTION # 92
If an administrator does not possess a website's certificate, which SSL decryption mode will allow the Palo
Alto networks NGFW to inspect traffic when users browse to HTTP(S) websites?
- A. SSL Forward Proxy
- B. SSL Inbound Inspection
- C. TLS Bidirectional proxy
- D. SSL Outbound Inspection
Answer: B
NEW QUESTION # 93
A firewall has been assigned to a new template stack that contains both "Global" and "Local" templates in Panorama, and a successful commit and push has been performed. While validating the configuration on the local firewall, the engineer discovers that some settings are not being applied as intended.
The setting values from the "Global" template are applied to the firewall instead of the "Local" template that has different values for the same settings.
What should be done to ensure that the settings in the "Local" template are applied while maintaining settings from both templates?
- A. Perform a commit and push with the "Force Template Values" option selected.
- B. Move the "Global" template above the "Local" template in the template stack.
- C. Override the values on the local firewall and apply the correct settings for each value.
- D. Move the "Local" template above the "Global" template in the template stack.
Answer: D
NEW QUESTION # 94
A company has a policy that denies all applications it classifies as bad and permits only application it classifies as good. The firewall administrator created the following security policy on the company's firewall.
Which interface configuration will accept specific VLAN IDs?
Which two benefits are gained from having both rule 2 and rule 3 presents? (choose two)
- A. A report can be created that identifies unclassified traffic on the network.
- B. Separate Log Forwarding profiles can be applied to rules 2 and 3.
- C. Rule 2 and 3 apply to traffic on different ports.
- D. Different security profiles can be applied to traffic matching rules 2 and 3.
Answer: B,D
NEW QUESTION # 95
An administrator wants multiple web servers in the DMZ to receive connections initiated from the internet.
Traffic destined for 206.15.22.9 port 80/TCP needs to be forwarded to the server at 10.1.1.22 Based on the information shown in the image, which NAT rule will forward web-browsing traffic correctly?
A:
B:
C:
D:
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 96
An administrator has been asked to create 100 virtual firewalls in a local, on-premise lab environment (not in
"the cloud"). Bootstrapping is the most expedient way to perform this task.
Which option describes deployment of a bootstrap package in an on-premise virtual environment?
- A. Create and attach a virtual hard disk (VHD).
- B. Use a virtual CD-ROM with an ISO.
- C. Use config-drive on a USB stick.
- D. Use an S3 bucket with an ISO.
Answer: B
Explanation:
Reference:
https://www.paloaltonetworks.com/documentation/71/pan-os/newfeaturesguide/management-features/bootstrapp firewalls-for-rapid-deployment.html
NEW QUESTION # 97
Which value in the Application column indicates UDP traffic that did not match an App-ID signature?
- A. unknown-ip
- B. incomplete
- C. unknown-udp
- D. not-applicable
Answer: C
Explanation:
To safely enable applications you must classify all traffic, across all ports, all the time. With App- ID, the only applications that are typically classified as unknown traffic--tcp, udp or non-syn-tcp--in the ACC and the Traffic logs are commercially available applications that have not yet been added to App-ID, internal or custom applications on your network, or potential threats.
NEW QUESTION # 98
In an existing deployment, an administrator with numerous firewalls and Panorama does not see any WildFire logs in Panorama. Each firewall has an active WildFire subscription On each firewall. WildFire togs are available.
This issue is occurring because forwarding of which type of logs from the firewalls to Panorama is missing?
- A. System logs
- B. WildFire logs
- C. Threat logs
- D. Traffic togs
Answer: C
Explanation:
Access to the WildFire logs from Panorama requires the following: a WildFire subscription, a File Blocking profile that is attached to a Security rule, and Threat log forwarding to Panorama. https://docs.paloaltonetworks.com/panorama/10-2/panorama-admin/monitor-network-activity/use-case-respond-to-an-incident-using-panorama/review-wildfire-logs
NEW QUESTION # 99
An administrator is using Panorama and multiple Palo Alto Networks NGFWs. After upgrading all devices to the latest PAN-OS software, the administrator enables log forwarding from the firewalls to PanoramA.
Pre-existing logs from the firewalls are not appearing in PanoramA.
Which action would enable the firewalls to send their pre-existing logs to Panorama?
- A. Use the ACC to consolidate pre-existing logs.
- B. The log database will need to exported form the firewalls and manually imported into Panorama.
- C. A CLI command will forward the pre-existing logs to Panorama.
- D. Use the import option to pull logs into Panorama.
Answer: C
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/8-0/pan-os-new-features/management-features/pa-7000-series-firewall
NEW QUESTION # 100
The certificate information displayed in the following image is for which type of certificate?
Exhibit:
- A. Self-Signed Root CA certificate
- B. Public CA signed certificate
- C. Forward Trust certificate
- D. Web Server certificate
Answer: A
NEW QUESTION # 101
A root cause analysis investigation into a recent security incident reveals that several decryption rules have been disabled. The security team wants to generate email alerts when decryption rules are changed.
How should email log forwarding be configured to achieve this goal?
- A. With the relevant system log filter inside Device > Log Settings
- B. With the relevant configuration log filter inside Objects > Log Forwarding
- C. With the relevant system log filter inside Objects > Log Forwarding
- D. With the relevant configuration log filter inside Device > Log Settings
Answer: D
NEW QUESTION # 102
A network administrator is troubleshooting an issue with Phase 2 of an IPSec VPN tunnel The administrator determines that the lifetime needs to be changed to match the peer. Where should this change be made?
- A. IPSec Tunnel settings
- B. IKE Gateway profile
- C. IPSec Crypto profile
- D. IKE Crypto profile
Answer: C
NEW QUESTION # 103
An engineer is troubleshooting traffic routing through the virtual router. The firewall uses multiple routing protocols, and the engineer is trying to determine routing priority Match the default Administrative Distances for each routing protocol.
Answer:
Explanation:
NEW QUESTION # 104
Given the screenshot, how did the firewall handle the traffic?
- A. Traffic was allowed by policy but denied by profile as a threat.
- B. Traffic was allowed by profile but denied by policy as a threat.
- C. Traffic was allowed by policy but denied by profile as a nonstandard port.
- D. Traffic was allowed by policy but denied by profile as encrypted.
Answer: A
Explanation:
Action - Allow
Session End Reason - Threat
NEW QUESTION # 105
An administrator needs to validate that policies that will be deployed will match the appropriate rules in the device-group hierarchy. Which tool can the administrator use to review the policy creation logic and verify that unwanted traffic is not allowed?
- A. Managed Devices Health
- B. Preview Changes
- C. Test Policy Match
- D. Policy Optimizer
Answer: C
Explanation:
The Test Policy Match tool in Palo Alto Networks' management systems (such as Panorama or the firewall interface) allows administrators to simulate traffic against configured security policies. This tool is critical for ensuring that the correct policies are applied to specific traffic patterns and that no unintended access is granted.
* Test Policy Match enables you to input parameters like source IP, destination IP, application, user, and more, and the system will determine which policy would apply.
* It is especially useful for verifying the device-group hierarchy in multi-tenant or Panorama-managed environments, ensuring that inherited or overridden rules are correctly applied.
* The tool also helps to proactively check that traffic will be blocked or allowed as intended, reducing misconfigurations and preventing unwanted traffic.
* A. Preview Changes: This feature is used to review configuration changes before committing them but does not simulate or validate policy matches.
* B. Managed Devices Health: This option is related to checking the health and connectivity status of managed devices, not policies.
* D. Policy Optimizer: This tool is used to refine existing security policies by identifying overly permissive rules or unused objects, not for testing specific traffic matches.
Key Points:Why not the other options?The Test Policy Match tool is the most appropriate choice for the scenario described.
NEW QUESTION # 106
Which CLI command can be used to export the tcpdump capture?
- A. download mgmt.-pcap
- B. scp export mgmt-pcap from mgmt.pcap to <username@host:path>
- C. scp extract mgmt-pcap from mgmt.pcap to <username@host:path>
- D. scp export tcpdump from mgmt.pcap to <username@host:path>
Answer: B
Explanation:
Reference:
https://live.paloaltonetworks.com/t5/Management-Articles/How-To-Packet-Capture-tcpdump-On-Management-Interface/ta- p/55415
NEW QUESTION # 107
......
Get Ready to Pass the PCNSE exam Right Now Using Our PCNSE PAN-OS Exam Package: https://www.pass4training.com/PCNSE-pass-exam-training.html
The Best PCNSE Exam Study Material and Preparation Test Question Dumps: https://drive.google.com/open?id=1Di62iuYFTtJnsTJo8em6QRUKov1Bq4cA
