Best Quality EMC D-VXR-DY-23 Exam Questions Pass4training Realistic Practice Exams [2024]
Critical Information To Dell VxRail Deploy 2023 Pass the First Time
NEW QUESTION # 26
What is a benefit when using VxRail-Managed vCenter?
- A. Ease of VM Migration across multiple clusters.
- B. Ease of operation for lifecycle management.
- C. Additional virtual distributed switch options.
- D. Enhanced security requirements.
Answer: B
NEW QUESTION # 27
You are expanding an existing 6 node VxRail V470F cluster by adding two additional V570F nodes.
What is the minimum VxRail version that will support this configuration?
- A. 4.5.200
- B. Mixed clusters are not supported
- C. 4.5.150
- D. 4.5.070
Answer: D
NEW QUESTION # 28
A VxRail deployment has just been completed but the vSAN performance statistics are not available for the cluster or virtual machines.
What is the reason for this situation?
- A. vSAN performance hot-fix has not been applied
- B. Monitoring policy has not been created
- C. Data has not been populated
- D. Performance service has not been manually enabled
Answer: B
NEW QUESTION # 29
What is the VxRail maximum cluster size if using 10 GbE links?
- A. 0
- B. 64 with an RPQ
- C. 32 with an RPQ
- D. 1
Answer: B
NEW QUESTION # 30
A company intends to deploy VxRail for their heavy database workloads.
Which type of VxRail nodes should be recommended?
- A. E Series
- B. P Series
- C. V Series
- D. S Series
Answer: B
NEW QUESTION # 31
What does the VxRail NVT validate when only Network Services Validation is enabled?
- A. VLAN configurations and port mode settings
- B. VLAN configurations, NTP, and DNS settings
- C. IP address conflicts, NTP, and DNS settings
- D. VLAN and STP configurations
Answer: C
NEW QUESTION # 32
What is the base URL for the VxRail API call?
- A. http://<VxM_IP>/vxm/v1/
- B. https://<VxM_IP>/rest/vxm/v1/
- C. https://<VCenter_IP>/rest/vxm/v1/
- D. https://<VxM_IP>/API/vxm/v1/
Answer: B
NEW QUESTION # 33
A workstation is being configured on the management VLAN (10.150.140.0/24) to connect to VxRail Manager for first time deployment.
Configuring which two IP addresses on the workstation will result in a successful deployment without having to change them during initialization?
- A. 192.168.10.250 and 10.150.140.250
- B. 192.168.1.250 and 10.150.140.255
- C. 192.168.1.199 and 10.150.140.100
- D. 192.168.10.199 and 10.150.140.255
Answer: A
NEW QUESTION # 34
You are demonstrating maintenance features on a new VxRail Cluster.
What is a recommended Dell EMC method for replacing a failed capacity disk?
- A. iDRAC Console > Reboot into PERC controller > Replace Disk > Rebuild
- B. VxRail Manager Plug-In > Appliance Front View > Replace Disk
- C. vSphere Client > Node > Enter Maintenance Mode > Replace Disk
- D. Hot Swap > vCenter Plug-in > Monitor Rebuild
Answer: B
NEW QUESTION # 35
A systems engineer is tasked to configure a VxRail cluster and notices that the VxRail Deployment Wizard fails to launch. The engineer discovers that the software is corrupted.
What should the engineer do to address the issue?
- A. Return the nodes to the original build state
- B. Check vCenter and troubleshoot the build failure
- C. Use the VMware Host Client and iDRAC to access the nodes for troubleshooting
- D. Verify that the JSON file is not corrupted and has all the required values
Answer: A
NEW QUESTION # 36
A Dell EMC solutions architect has updated the VxRail PEQ with Customer Top-of-Rack (ToR) switch details.
On which worksheet would they need to be to generate a new NVT JSON file?
- A. Customer
- B. Engagement Details
- C. Networking Details
- D. VxRail Cluster
Answer: D
NEW QUESTION # 37
Which VxRail Pre-Installation Site Checklist worksheet is auto-populated?
- A. Switch Config Actuals
- B. Network Basics
- C. Begin Here
- D. VxRail Network Configuration
Answer: B
NEW QUESTION # 38
You require a service tag for a VxRail service request. Where could you find this?
- A. Secure Remote Services device list
- B. Cluster level physical view
- C. Appliance level physical view
- D. VxRail Manager BIOS
Answer: C
NEW QUESTION # 39
When validating the VxRail health just after the VxRail initial configuration, there is a red exclamation mark on the MARVIN-Virtual-SAN-Cluster and the reported health alarm is 'Component metadata health'.
A "Retest" action in the health service panel is performed and all the nodes in the cluster show health status as failed with the invalid state. Investigation does not reveal any hardware issues with the disks in use by vSAN.
What action should be taken next?
- A. Evacuate and destroy the disk/disk group that contains the component(s) reporting errors and clear the alarm
- B. Apply the vSphere ESXi600-201611001 patch, then click the "Retest" button again
- C. Wait 24 hours, then click the "Retest" button again
- D. Reapply the MARVIN storage policy to the VxRail internal virtual machines
Answer: B
NEW QUESTION # 40
For how many days are the vSphere evaluation licenses valid in a new VxRail implementation?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 41
What can be used to determine whether hardware faults exist on a VxRail prior to its deployment?
- A. VxRail NVT
- B. VxRail Pre-validation
- C. PEQ
- D. iDRAC
Answer: D
NEW QUESTION # 42
What setting is used for the object space reservation in the VXRAIL-SYSTEM-STORAGE-PROFILE?
- A. 50% Reservation
- B. 75% Reservation
- C. Thick Provisioning
- D. Thin Provisioning
Answer: C
NEW QUESTION # 43
Where is the VxRail Documentation Quick Reference List located?
- A. Dell Technologies Support Page
- B. Dell Technologies Central
- C. Dell Technologies SolVe Online
- D. VxRail Configuration Portal
Answer: A
NEW QUESTION # 44
What does vSAN use to make metadata available to each host in the VxRail cluster?
- A. CMMDS
- B. MLD Snooping and Querier
- C. Loudmouth
- D. IPv6 Multicast
Answer: A
NEW QUESTION # 45
What network protocol is required for a VxRail Management VLAN?
- A. IPv6 Unicast
- B. IPv6 Multicast
- C. IPv4 Multicast
- D. IPv4 Unicast
Answer: B
NEW QUESTION # 46
After the installation of a VxRail cluster, the vSAN Health Check shows a hardware compatibility warning.
Where can detailed information about this health check and its resolution be found?
- A. VMware Knowledge Base
- B. Dell EMC Knowledge Base
- C. VxRail Manager Help
- D. vCenter Server Help
Answer: A
NEW QUESTION # 47
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?
- A. Data-In-Transit Encryption: Addresses fear of media theft Data-At-Rest Encryption: Addresses fear of rogue administrators
- B. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
- C. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodesData-At-Rest Encryption: Encrypts traffic between VxRail nodes only
- D. Data-In-Transit Encryption: Does not require a Key Management ServerData-At-Rest Encryption: Requires a Key Management Server
Answer: D
NEW QUESTION # 48
You are configuring a VxRail to connect to an existing, external SRS VE. The customer's support account is associated with the Site ID/Party ID where VxRail is installed. A validation error is issued when you attempt to register VxRail in SRS.
What is the possible cause for the error?
- A. SRS traffic goes through a proxy server
- B. Status of VxRail in Install Base is Shipped
- C. Number of deployed devices on SRS gateway has exceeded the maximum
- D. Wrong IP address was used for SRS VE gateway
Answer: B
NEW QUESTION # 49
The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption.
What is the correct configuration to satisfy this requirement?
- A. External vCenter Embedded PSC
- B. External vCenter External PSC
- C. Embedded vCenter Embedded PSC
- D. Embedded vCenter External PSC
Answer: B
NEW QUESTION # 50
......
D-VXR-DY-23 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.pass4training.com/D-VXR-DY-23-pass-exam-training.html
Best Quality EMC D-VXR-DY-23 Exam Questions: https://drive.google.com/open?id=1NG6JMFaN9pO9TultymF8Tkm26ENv-QF7
