Exam Passing Guarantee Feb 11, 2023 NS0-516 Exam with Accurate Quastions!
Test Engine to Practice Test for NS0-516 Valid and Updated Dumps
NEW QUESTION 39
Exhibit:
Referring to the exhibit, what would you select in the search list to see all of the host selections for NetApp ESeries storage systems?
- A. SANtricity
- B. E-Series Controller Firmware
- C. Storage OS
- D. E-Series SAN Host
Answer: D
NEW QUESTION 40
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)
- A. Unreadable sectors log
- B. Recovery Guru
- C. Real-time performance monitor
- D. Host Mappings tab
Answer: D
NEW QUESTION 41
A company implemented Automatic Load Balancing (ALB). When the controller workloads are monitored, it becomes obvious that there is an imbalance and that ALB is not working correctly.
In this scenario, what are two causes of the problem? (Choose two.)
- A. The company implemented a host type that does not support ALB
- B. The company implemented a host multipath driver that does not support ALB
- C. The company implemented a load balancing min-min algorithm that does not support ALB
- D. The company implemented an adaptive load balancing agent that does not support ALB
Answer: A,B
NEW QUESTION 42
What is the 'base' host connectivity provided by the E5400 Controller? (Choose the best answer.)
- A. IB
- B. SAS
- C. iSCSI
- D. None
- E. FC
Answer: E
NEW QUESTION 43
All non-I/O related activity on the storage system is recorded in the _____________. (Choose the best answer.)
- A. Cache backup device
- B. NVSRAM
- C. Event Log
- D. Storage Array Profile
- E. DACstore
Answer: E
NEW QUESTION 44
What is the SANtricity Client?
- A. Inter-process communication that supports computer program subroutines
- B. A controller process that enables storage system management with the storage data path
- C. An OS-dependent collection of utilities for servers attached to SANtricity managed storage systems
- D. A GUI or CLI that runs on a server used for storage system management
Answer: D
NEW QUESTION 45
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Swap out the HBA on the FC switch
- B. Swap out the SFP in the controller port
- C. Reinitialize the FC switch
- D. Move the connection to another controller port
- E. Swap out the FC cable
Answer: B,C,E
NEW QUESTION 46
What is the maximum number of FC host interface cards used per NetApp EF600 storage array?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 47
If you want to mirror data from Los Angeles to New York (approximately a 5,000-km distance), which mirroring feature should you use?
- A. Semi-synchronous
- B. Synchronous
- C. Asynchronous
- D. Asynchronous synchronous mode
Answer: C
NEW QUESTION 48
Which SANtricity installation package contains the graphical user interface that configures a storage system?
- A. SMclient
- B. SMutils
- C. SMcli
- D. SMagent
Answer: A
NEW QUESTION 49
To enable one-way authentication in a new iSCSI Linux implementation, which three modifications should you make in the /etc/iscsi/iscsi.conf file on the Linux host? (Choose three.)
- A. the initiator username and password
- B. sendtargets discovery
- C. iSCSI
- D. the target username and password
- E. CHAP
Answer: B,E
NEW QUESTION 50
With ALUA support, how does the storage system handle I/Os to the non-preferred path? (Choose the best answer.)
- A. They are shipped over to the owning controller to be managed, then returned through the non-preferred path after completion.
- B. They are rejected with a specific SCSI check condition.
- C. They are accepted but maintained in cache with a special change log, and only processed after 5 minutes when volume ownership may be changed.
- D. The non-owning controller takes ownership of the volume in order to handle them, then restores ownership to the original controller.
- E. The controller handles them normally, updating both controllers' cache to maintain consistency, which is why ALUA requires cache mirroring to be enabled.
Answer: A
NEW QUESTION 51
An administrator is asked to migrate two DE6600 shelves into a newly deployed E5760 environment that is configured with a stack of two DE460C shelves.
In this scenario, how does the administrator complete this task?
- A. Cable the DE6600s between the DE460C shelves
- B. Cable the DE6600s at the end of the stack
- C. Cable the DE6600s at the beginning of the stack
- D. Cable the DE6600s into a separate stack
Answer: D
Explanation:
Explanation
https://library.netapp.com/ecm/ecm_download_file/ECMLP2773537
When you cable a mix of SAS-2 and SAS-3 drive shelves to the same controller shelf, you should use a dual-stack configuration. Put all of the SAS-3 drive shelves in one stack and all of the SAS-2 drive shelves in the other stack.
NEW QUESTION 52
You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?
- A. portloginshow <port>
- B. nsshow
- C. switchshow
- D. zoneshow
Answer: C
NEW QUESTION 53
You are adding drives to an existing Dynamic Disk Pool (DDP).
In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)
- A. if the drives are the same capacity or larger
- B. if the drives have a compatible security type
- C. if the drives are from the same manufacturer
- D. if the drives have the same firmware level
Answer: A,B
NEW QUESTION 54
An E2812 system, without expansion shelves, is configured with 12 Gb SAS host interface cards (HICS) and is directly connected to a host. However, the host cannot access the volumes.
In this scenario, which two troubleshooting steps should you take? (Choose two)
- A. Verify that the host can ping the E2812 system over the SAS link
- B. Verify that the E2812 host port SAS link up lights are illuminated
- C. Verify that the E2812 SAS CHAP secret is set.
- D. Verify that the correct SAS ports are in use on the E2812 system
Answer: B,D
NEW QUESTION 55
What function can the storage system use to preserve cache data in the event of a complete controller failure?
- A. SSD read cache
- B. Cache mirroring
- C. Read caching
- D. Pre-fetch caching
- E. Write caching
Answer: B
NEW QUESTION 56
If there is a power outage to the controllers, what happens to data in cache?
- A. Data in cache is not lost because controllers are always connected to UPS devices.
- B. Data in cache is not lost because cache is ROM technology.
- C. Data in cache is lost because cache RAM is volatile.
- D. Data in cache is not lost because cache is backed up by batteries.
Answer: D
NEW QUESTION 57
Which three documents should be provided to the customer after the e-Series installation is complete?
(choose three.)
- A. a document showing how much space is available for system expansion
- B. a document showing available power on the UPS with no equipment connected
- C. a document showing user IDs and passwords for all deployed devices
- D. a b a document with IMT pages that show the supported host configuration and fabric switches in the solution
- E. a document showing the cabinet layout with cabling information and IP addresses being used
Answer: C,D,E
NEW QUESTION 58
......
Exam Questions for NS0-516 Updated Versions With Test Engine: https://www.pass4training.com/NS0-516-pass-exam-training.html
Pass NS0-516 Exam with Updated NS0-516 Exam Dumps PDF: https://drive.google.com/open?id=19J1Yuu0gl1ioSbvwp-TmpFKycAF_KCc9
