Real JN0-363 Exam Questions are the Best Preparation Material
Practice on 2023 LATEST JN0-363 Exam Updated 265 Questions
NEW QUESTION # 138
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 can only form a single adjacency
- B. Interface ge-3/0/0.0 has a default metric of 10
- C. Interface xe-0/0/0.0 has a default metric of 10
- D. Interface ge-1/0/0.0 can only form a single adjacency
Answer: D
NEW QUESTION # 139
You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this scenario?
- A. The device with the lowest MAC address will be elected as the root bridge.
- B. The device with the lowest numerical lo0 IP address will be elected as the root bridge.
- C. The device with the highest numerical lo0 IP address will be elected as The bridge.
- D. The device with the highest MAC address will be elected as the root bridge.
Answer: A
NEW QUESTION # 140
What are two benefits of using an OSPF designated router (DR)? (Choose two.)
- A. Reduces LSA flooding throughout an OSPF area.
- B. Reduces the size of the link-state database.
- C. Reduces router resources used.
- D. Reduces LSA flooding on a broadcast segment.
Answer: C,D
NEW QUESTION # 141
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
- A. ES2 is not interested in VLAN 300.
- B. ES1 is not advertising VLAN 300 to AS1.
- C. AS1's VLAN ID list is missing an entry for VLAN 300.
- D. AS1 is not allowing ES2 access to VLAN 300.
Answer: A
NEW QUESTION # 142
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
- A. IS-IS
- B. BGP
- C. MPLS
- D. OSPF
Answer: A,D
NEW QUESTION # 143
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an export policy to the internal BGP peers.
- B. Apply the next-hop-self as an export policy to the external BGP peers.
- C. Apply the next-hop-self as an import policy to the external BGP peers.
- D. Apply the next-hop-self as an import policy to the internal BGP peers.
Answer: A
NEW QUESTION # 144
What is the correct description of an Area Border Router (ABR)?
- A. An ABR is an OSPF router that injects routing information from outside the OSPF AS
- B. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
- C. An ABR is an OSPF router with at least one link in a Layer 2 area
- D. An ABR is an OSPF router with all of its links within an area
Answer: B
NEW QUESTION # 145
Which two statements ate correct about the actions taken as the packet traverses the service provider MPLS network from Site 1 to Site 2 as shown in the exhibit?
(Choose two.)
- A. R1 will perform a lookup using the mpls.0 table.
- B. R2 will perform a lookup using the mpls.0 table.
- C. R1 will perform a lookup using the lnet.3 table.
- D. R2 will perform a lookup using the inet.3 table.
Answer: B
NEW QUESTION # 146
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes use a step-up algorithm when collisions are detected.
- B. Nodes share a physical medium.
- C. It consists of a single broadcast domain.
- D. Nodes can successfully transmit simultaneously.
Answer: B,C
NEW QUESTION # 147
Click the Exhibit.
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?
- A. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet {address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}}
- B. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}
- C. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet {address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}} bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-0/0/0.0;}}
- D. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}}
Answer: B
NEW QUESTION # 148
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?
- A. Level 1 is disabled and Level 2 is disabled.
- B. Level 1 is enabled and Level 2 is disabled.
- C. Level 1 is enabled and Level 2 is enabled.
- D. Level 1 is disabled and Level 2 is enabled.
Answer: A
NEW QUESTION # 149
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. protocol
- B. destination port
- C. destination address
- D. source port
- E. source address
Answer: A,C,E
NEW QUESTION # 150
Which two statements are correct about IS-IS? (Choose two.)
- A. For level 2 adjacencies, the area IDs can be different.
- B. A level 1 only router can form an adjacency with a level 2 only router.
- C. For level 2 adjacencies, the area IDs must be the same.
- D. A level 1 only router can never form an adjacency with a level 2 only router.
Answer: B,C
NEW QUESTION # 151
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)
- A. BGP
- B. MSTP
- C. RIP
- D. RSTP
Answer: B,D
NEW QUESTION # 152
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. multipath
- B. export <policy name>
- C. type external
- D. type internal
Answer: D
NEW QUESTION # 153
Exhibit
Referring to the exhibit, how do you verify the status of the tunnel from R1?
- A. Issue the ping 172.20.111.10 source 198.51.100.1 command.
- B. Issue the ping 172.20.111.10 source 172.20.110.1 command.
- C. Issue the ping 172.20.iii.io source 203.0.113.2 command.
- D. Issue the ping 172.20. Ill. 10 command.
Answer: C
NEW QUESTION # 154
Which two statements ate correct about the information shown in the exhibit? (Choose two.)
- A. This switch has a bridge priority of 8k.
- B. This switch is the root bridge for this spanning tree topology.
- C. The root bridge's priority Is 4k.
- D. The root bridge is reachable using the ge-0/0/14 interface.
Answer: B,C
NEW QUESTION # 155
You must establish an MPLS LSP between two locations. You are required to ensure that the LSP traverses specific routers within the network.
Which solution is correct in this scenario?
- A. Implement RSVP and define the explicit route the LSP must follow
- B. Implement LDP and define the explicit route the LSP must follow
- C. Enable traffic engineering within LDP and define the explicit route the LSP must follow
- D. Enable traffic engineering within RSVP and enable the Fast Reroute feature
Answer: A
NEW QUESTION # 156
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By default. Which two tasks does the bridge perform in response to receiving a multicast frame? (Choose two)
- A. It drops the frame
- B. It floods the frame out of all interfaces except the one on which it was received
- C. It learns the source MAC address
- D. It floods the frame out of particular interfaces based on its multicast MAC table
Answer: B,C
NEW QUESTION # 157
Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?
- A. IP subnets
- B. OSPF areas
- C. VLAN
- D. IS-IS levels
Answer: C
NEW QUESTION # 158
Exhibit
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?
- A. R1 and R2 must each have unique AS numbers.
- B. R1 does not have a route to 192.168.200.2.
- C. R1 needs to be configured with an explicit router ID.
- D. R1 needs to be configured with a next-hop self policy.
Answer: B
NEW QUESTION # 159
You are adding nonforwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)
- A. Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
- B. Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
- C. Add the route reflectors to the same IGP domain as their clients.
- D. Add a static default route to inet.3 and/or inet6.3 on the route reflectors.
- E. Add MPLS LSPs between the route reflectors and their client routers.
Answer: B,D,E
NEW QUESTION # 160
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
- A. 192.168.1.3
- B. 172.18.1.0/24
- C. 172.26.4.0730
- D. 192.108.1.4
Answer: C
NEW QUESTION # 161
Which statement is true about routing instances on Junos devices?
- A. Junos device support only one routing instance.
- B. Routing information cannot be shared between routing instance.
- C. Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.
- D. Each routing protocol runs in a separate routing instance.
Answer: C
NEW QUESTION # 162
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
- A. Configure the no-propagate-ttl parameter for each LSP on the egress device
- B. Configure the no-decrement-ttl parameter for each LSP on the egress device
- C. Configure the no-decrement-ttl parameter for each LSP on the ingress device
- D. Configure the no-propagate-ttl parameter for each LSP on the ingress device
Answer: A
NEW QUESTION # 163
......
Authentic JN0-363 Exam Dumps PDF - May-2023 Updated: https://www.pass4training.com/JN0-363-pass-exam-training.html
Download Latest JN0-363 Dumps with Authentic Real Exam QA's: https://drive.google.com/open?id=1FS2X2ZR56NM73VClWOpyqoEuaFO9bOSQ
