Steps Necessary To Pass The 350-801 Exam from Training Expert Pass4training
Valid Way To Pass CCNP Collaboration's 350-801 Exam
Cisco 350-801 exam is a combination of both theoretical and practical assessments that are aimed at evaluating the candidate's proficiency in implementing and operating Cisco collaboration core technologies. 350-801 exam consists of multiple-choice questions, simulations, and hands-on lab exercises that are designed to test the candidate's technical skills and problem-solving abilities. Successful completion of 350-801 exam demonstrates a candidate's ability to design, implement, and troubleshoot complex Cisco collaboration solutions, making them a valuable asset to any organization that uses Cisco collaboration technologies.
Achieving the Cisco Certified Network Professional (CCNP) Collaboration certification, which includes passing the 350-801 exam, demonstrates a high level of expertise in Cisco collaboration technologies and can help IT professionals advance their careers in the field of collaboration and communication technologies.
NEW QUESTION # 54
Refer to the exhibit.
Refer to the exhibit. An engineer configures ISDN on a voice gateway. The provider confirms that the PRI is configured with 10 channels the engineer ordered and is working from the provider side, but the engineer cannot get a B-channel to carry voice. The rest of the configuration for the serial interface and voice network is functioning correctly. Which actions must be taken to carry voice?
- A. The engineer must activate the controller card on the voice gateway before configuring the device.
- B. The engineer must manually revert the order of using the channels.
- C. The engineer used a T1 interface but must use an E1 interface.
- D. The pri-group timeslots command must be 0-9 for the 10 channels because all values on a router start with 0.
Answer: A
NEW QUESTION # 55
A Cisco collaboration engineer is troubleshooting unexpected SIP call disconnects. Which three responses correspond to the 5xx range (Chose three).
- A. Bad request
- B. Server timeout
- C. Temporarily unavailable
- D. Service unavailable
- E. Forbidden
- F. Version not supported
Answer: B,D,F
NEW QUESTION # 56
Refer to the exhibit.
Refer to the exhibit. When making a call to a Mobile and Remote Access client, what are the combinations of protocol on each of the different sections A-B-C?
- A. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
- B. SIP TLS (A) + SIP TLS (B) + SIP TLS (C)
- C. IP TCP/TLS (A) + SIP TCP/TLS (B) + SIP TLS (C)
- D. SIP TCP/TLS (A) + SIP TCP/TLS (B) + SIP TCP/TLS (C)
Answer: A
NEW QUESTION # 57
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?
A)
B)
C)
D)
- A. Exhibit B
- B. Exhibit A
- C. Exhibit C
- D. Exhibit D
Answer: A
NEW QUESTION # 58
An employee of company ABC just quit. The IT administrator deleted the employee's user id from the active directory at 10 a m. on March 4th The nightly sync occurs at 10 p.m. daily. The IT administrator wants to troubleshoot and find a way to delete the user id as soon as possible How is this issue resolved?
- A. Wart until 10 pm on March 4th when the user is automatically removed from Cisco UCM.
- B. Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.
- C. Wait until 315am on March 5th for garbage collection to remove the user from Cisco UCM.
- D. Wait until 3 15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.
Answer: D
NEW QUESTION # 59
Which command is used in Cisco IOS XE TDM gateway to configure the voice T1/E1 controller to provide clocking?
- A. Cisco IOS XE TDM gateway T1/E1 controller cannot provide clocking.
- B. clock source line
- C. clocking source internal
- D. clocking source network
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/ guide/4gen-t1-e1-nim-guide.html
NEW QUESTION # 60
Calls are being delivered to the end user in the globalized format. Where does an engineer configure the calling number into a localized format?
- A. route pattern
- B. service parameters
- C. gateway
- D. IP phone
Answer: C
NEW QUESTION # 61
A high-speed network is often configured with a five-class QoS model. Which classes are used in the model?
- A. voice, video, signaling critical data, and best-effort
- B. real-time, call-signaling, critical data, best-effort, and scavenger
- C. real-time, signaling, critical data, best-effort, and drop-class
- D. call-signaling, real-time, critical data, best-effort, and drop-class
Answer: B
Explanation:
https://www.cisco.com/en/US/technologies/tk543/tk759/technologies_white_paper0900aecd8029
5a9b.pdf
NEW QUESTION # 62
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.
Answer:
Explanation:
Explanation
Voice = EF
Interactive Video = AF41
Bulk Data = AF11
Call-Signaling = AF31/CS3
Network Management = CS2
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/Qo
NEW QUESTION # 63
Why would we not include an end user's PC device in a QoS trust boundary?
- A. There is no reason not to include an end user's PC device m a QoS trust boundary
- B. The end user may incorrectly tag their traffic to be prioritized over other network traffic
- C. The end user could incorrectly tag their traffic to advertise their PC as a default gateway.
- D. The end user could incorrectly tag their traffic to bypass firewalls.
Answer: B
Explanation:
When it comes to QoS, it is best practice to mark packets as close to the source as possible.
Most devices, such as computers and servers cannot mark their own packets and should not be trusted even if they can. Cisco phones, however, can mark their own packets and can be trusted with the QoS markings they provide.
Therefore, QoS trust boundaries should be set up so that the switch will trust the QoS markings phones place on their own packets
NEW QUESTION # 64
Which two protocols can be configured for the Cisco Unity Connection and Cisco UCM integration? (Choose two.)
- A. RTP
- B. SIP
- C. MGCP
- D. SCCP
- E. H. 323
Answer: B,D
Explanation:
The two protocols that can be configured for the Cisco Unity Connection and Cisco UCM integration are SIP and SCCP.
SIP, or Session Initiation Protocol, is a signaling protocol used for initiating, maintaining, and terminating real-time sessions, including voice, video, and messaging applications.
SCCP, or Skinny Client Control Protocol, is a Cisco proprietary signaling protocol used for controlling Cisco IP phones.
H. 323 is an older signaling protocol that is no longer widely used. MGCP, or Media Gateway Control Protocol, is a protocol used for controlling media gateways. RTP, or Real-time Transport Protocol, is a protocol used for transporting real-time data, such as voice and video
NEW QUESTION # 65
What is the importance of locations when using location-based CAC within Cisco UCM?
- A. They define the amount of available bandwidth for the link.
- B. They define the geographic regions to which resources are assigned.
- C. They define the minimum bandwidth of the codec that is used for a call.
- D. They define the maximum bandwidth of the codec that is used for a call.
Answer: A
NEW QUESTION # 66 
Refer to the exhibit. An engineer is confining class of control for a user in Cisco UCM. Which change will ensure that the user is unable to call 2143?
- A. Change line CSS to only contain Partition_B
- B. Set the user's line CSS to <None>
- C. Set the users device CSS to <None>
- D. Change line partition to Partition_A
Answer: C
NEW QUESTION # 67
An engineer encounters third-party devices that do not support Cisco Discovery Protocol. What must be configured on the network to allow device discovery?
- A. TFTP
- B. LLDP
- C. SNMP
- D. LACP
Answer: B
Explanation:
LLDP (Link Layer Discovery Protocol) is a vendor-neutral network discovery protocol that is used to discover the topology of a network. LLDP is similar to CDP (Cisco Discovery Protocol), but it is not proprietary to Cisco. LLDP is supported by a wide range of network devices, including switches, routers, and firewalls.
To configure LLDP on a network, you must enable LLDP on the devices that you want to discover. You can then use a network management tool, such as Cisco Network Assistant, to view the topology of the network.
The other options are incorrect. TFTP (Trivial File Transfer Protocol) is a network protocol that is used to transfer files between devices. LACP (Link Aggregation Control Protocol) is a network protocol that is used to aggregate multiple network links into a single logical link. SNMP (Simple Network Management Protocol) is a network protocol that is used to manage network devices.
NEW QUESTION # 68
How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?
- A. Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.
- B. On the inbound SIP trunk, change Significant Digits to 10.
- C. Configure a calling party transformation pattern that keeps only last 10 digits.
- D. Change the service parameter Apply Transformations On Remote Number to True.
Answer: D
NEW QUESTION # 69
How are E.164 called-party numbers normalized on a globalized call-routing environment is Cisco Unified Communications Manger?
- A. Call ingress must be normalized before the call being routed.
- B. Normalization is achieved by setting up calling search and partitions at the SIP trunk for PSTN connection.
- C. Normalization is not required
- D. Normalization is achieved by stripping or translating the called numbers to internally used directory numbers.
Answer: D
Explanation:
Normalized called-party numbers: E.164 format with the +prefix is used for external destination.
Therefore, called-number normalization is the result of globalization. Internal directory numbers are used for internal destinations. Normalization is achieved by stripping or translating the called numbers to internally used directory numbers.
NEW QUESTION # 70
Why would we not include an end user's PC device in a QoS trust boundary?
- A. There is no reason not to include an end user's PC device m a QoS trust boundary
- B. The end user may incorrectly tag their traffic to be prioritized over other network traffic
- C. The end user could incorrectly tag their traffic to advertise their PC as a default gateway.
- D. The end user could incorrectly tag their traffic to bypass firewalls.
Answer: B
Explanation:
"Most devices, such as computers and servers, cannot mark their own packets and should not be trusted even if they can. Cisco phones, however, can mark their own packets and can be trusted with the QoS markings they provide."
NEW QUESTION # 71
Refer to the exhibit.
Refer to the exhibit There is a call flow between Phone A and Phone B Phone B (holder) places Phone A (holder) on hold Which MRGL and Audio Source are played to Phone A?
- A. MRGL B and Audio Source 2
- B. MRGL A and Audio Source 2
- C. MRGL A and Audio Source 4
- D. MRGL B and Audio Source 4
Answer: B
NEW QUESTION # 72
Refer to the exhibit.
An administrator configures a secure SIP trunk on Cisco UCM. Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomplish this task?
- A. the fully qualified domain name of all Cisco UCM nodes that run the CallManager service
- B. the common name of the Cisco UCM CallManager certificate
- C. the common name of the remote device certificates
- D. the fully qualified domain name of the remote device that is configured on the SIP trunk
Answer: A
NEW QUESTION # 73
......
Cisco 350-801 exam is a highly sought-after certification for IT professionals who want to demonstrate their expertise in implementing and operating Cisco collaboration core technologies. Implementing and Operating Cisco Collaboration Core Technologies certification not only validates the candidate’s knowledge and skills but also enhances their value in the job market. Professionals who pass 350-801 exam are in high demand and can secure well-paying jobs in reputable organizations.
All 350-801 Dumps and Implementing and Operating Cisco Collaboration Core Technologies Training Courses: https://www.pass4training.com/350-801-pass-exam-training.html
Free Test Engine For Implementing and Operating Cisco Collaboration Core Technologies Certification Exams: https://drive.google.com/open?id=15-tYQW3uStZjgcCgSjUWnC5RJrJ2QmE0
