5V0-42.21 Dumps To Pass VMware Exam in 24 Hours - Pass4training
Buy Latest 5V0-42.21 Exam Q&A PDF - One Year Free Update
VMware SD-WAN Design and Deploy Skills exam is a professional-level examination for technical people who are involved in designing and implementing next-generation software-defined WAN solutions for enterprise networks that meet business requirements. VMware SD-WAN Design and Deploy Skills certification exam covers the full spectrum of VMware SD-WAN technologies, from architecture and design to installation, configuration, and deployment. 5V0-42.21 exam enables candidates to develop the skills necessary to design, deploy and manage the VMware SD-WAN solution.
NEW QUESTION # 19
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate Enabled
- B. Certificate Disabled
- C. Certificate Accepted
- D. Certificate Requited
- E. Certificate ate Optional
- F. Certificate Activated
Answer: A,B,C
NEW QUESTION # 20
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Segments
- B. Firewall
- C. VLANs
- D. Business Policy
Answer: A
NEW QUESTION # 21
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Select Transport Group, and then select Preferred option.
- B. Select Error Correct Before Steering with % definition
- C. Deselect Error Correct before Steering Defaults.
- D. Select WAN Link, and then define the DSCP tagging
Answer: D
NEW QUESTION # 22
Which VMware SR-WAN component runs the Deep Application Recognition Engine?
- A. VMware SD-WAN Gateway
- B. VMware SD WAN Orchestrator
- C. VMware SD-WAN Controller
- D. VMware SD-WAN Edge
Answer: C
NEW QUESTION # 23
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - D. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
Answer: D
NEW QUESTION # 24
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?
- A. Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
- B. VMware SD-WAN will use SSL inspection to detect Office 365.
- C. The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
- D. Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.
Answer: C
NEW QUESTION # 25
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?
- A. RIP Version 2
- B. BGP
- C. Static
- D. OSPF
Answer: A
NEW QUESTION # 26
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. velocloud
- B. No password required
- C. adnim
- D. Password configured in cloud_init
Answer: D
NEW QUESTION # 27
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
- B. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- C. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
- D. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
Answer: D
NEW QUESTION # 28
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDF 2426
- B. TCP 443
- C. UDP 500
- D. TCP 80
Answer: D
NEW QUESTION # 29
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?
- A. Partially on-premises
- B. Hosted SD-WAN Orchestrator/Controller
- C. On-premises SD-WAN Orchestrator/Controller
- D. All on-premises
Answer: D
NEW QUESTION # 30
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?
- A. WAN side
- B. Overlay
- C. Underlay
- D. LAN side
Answer: A
NEW QUESTION # 31
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
- D. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
Answer: D
NEW QUESTION # 32
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?
- A. Superuser: User can view but cannot create additional admin.
- B. Enterprise read only: User can view but not modify configurations.
- C. Standard Admin User can view but cannot manage their customer.
- D. Customer Support User can view and manage then company's network
Answer: D
NEW QUESTION # 33
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?
- A. Enable tag type QinQ under hand off interface configuration
- B. Configure source policy-based NAT under business- policies configuration
- C. Enable NAT hand off under hand off static routes configuration
- D. Define multiple segments tor each customer
Answer: D
NEW QUESTION # 34
Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology.
Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?
- A. Branch to Branch VPN
- B. Branch to CASH
- C. Branch to Non VMware SU-WAN Site
- D. Site-to-Site VPN
Answer: B
NEW QUESTION # 35
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 2 segments
- B. 4 segments
- C. 5 segments
- D. 6 segments
Answer: C
NEW QUESTION # 36
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. SFP1
- B. GE4
- C. GE1
- D. Any port may be chosen.
Answer: A
NEW QUESTION # 37
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. A VCE cluster requires one dedicated interface for HA sync
- B. VCF clusters member sync flow tables between themselves.
- C. VCE cluster members should have unique IP addresses on its WAN interfaces
- D. One VCE cluster can be formed with both virtual and hardware at the same lime
Answer: B
NEW QUESTION # 38
......
Download the Latest 5V0-42.21 Dump - 2023 5V0-42.21 Exam Question Bank: https://www.pass4training.com/5V0-42.21-pass-exam-training.html
Latest VMware 5V0-42.21 Certification Practice Test Questions: https://drive.google.com/open?id=1bO9FLM64R9sKrQ_JVQusELH4emPH6v_I
