5V0-42.21 Braindumps Real Exam Updated on Oct 16, 2023 with 53 Questions
Latest 5V0-42.21 PDF Dumps & Real Tests Free Updated Today
VMware 5V0-42.21 certification exam is designed to test your knowledge and skills in designing and deploying VMware SD-WAN solutions. It covers a range of topics, including the architecture and design of SD-WAN solutions, the deployment and configuration of SD-WAN components, and the integration of SD-WAN with other VMware solutions. By earning this certification, you will be able to demonstrate your expertise in SD-WAN design and deployment, and distinguish yourself as a qualified professional in the field.
The VMware 5V0-42.21 exam covers a wide range of topics related to SD-WAN design and deployment. Candidates must have a deep understanding of SD-WAN architecture, including the various components and how they work together. They must also be able to design and deploy SD-WAN solutions that meet specific business requirements, such as improving application performance, reducing costs, and increasing security.
NEW QUESTION # 14
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?
- A. Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
- B. Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.
- C. The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
- D. VMware SD-WAN will use SSL inspection to detect Office 365.
Answer: D
NEW QUESTION # 15
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- D. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
Answer: C
NEW QUESTION # 16
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.
- A. Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet
- B. Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet
- C. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet
- D. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet
Answer: B
NEW QUESTION # 17
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. No password required
- B. Password configured in cloud_init
- C. adnim
- D. velocloud
Answer: B
NEW QUESTION # 18
An administrator is looking for a cost effective model of hardware-based Edge for some branch offices. The device must be mounted in rack cabinet, and to meet performance requirements and projected growth, the appliance must support up to 2 Gpbs bandwidth.
Which Edge modelsatisfies these requirements?
- A. Edge 510
- B. Edge 540
- C. Edge 620
- D. Edge 3400
Answer: B
NEW QUESTION # 19
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. Fault Domain HA
- B. Standard HA
- C. VRRP HA
- D. Enhanced HA
Answer: C
NEW QUESTION # 20
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN.
Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?
- A. Branch to Main Office VPN
- B. Branch to Non VMware SD-WAN Site.
- C. Branch to Branch VPN
- D. Branch to SD-WAN Hub
Answer: B
NEW QUESTION # 21
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. High Availability Configuration
- B. Branch Site Topologies
- C. Business Policy Framework
- D. Overlay Flow Control
Answer: C
NEW QUESTION # 22
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
- B. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- C. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
- D. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
Answer: C
NEW QUESTION # 23
Which characteristic of Software Defined Networks (SDN) is also true for VMware SD-WAN
- A. VMware SD-WAN provides separation of management control plane, and the data plane.
- B. VMware SU-WAN allows customers to program the forwarding plane
- C. VMware SD -WAN provides distributed management and control plane
- D. VMware SD-WAN requires specialized hardware to run its software
Answer: D
NEW QUESTION # 24
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?
- A. LAN side
- B. WAN side
- C. Overlay
- D. Underlay
Answer: B
NEW QUESTION # 25
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?
- A. Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.
- B. Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.
- C. From the Orchestrator, select the check-box next to the appropriate gateway, choose ''Assign Software image", and then select the version for the upgrade.
- D. Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run 'sudo apt-get update'' from the Gateway console.
Answer: B
NEW QUESTION # 26
A customer is using VMware vSphere in their data center. An administrator is asked to deploy SD-WAN Edges for a Proof of Concept as soon as possible.
Which deployment option is the roost cost and time effective?
- A. Deploy a virtual appliance in AWS
- B. Deploy a virtual appliance on ESXi
- C. Deploy a virtual appliance on KVM
- D. Purchase bare metal Edge
Answer: C
NEW QUESTION # 27
Given a VMware SD WAN Branch Edge with Dual Internet links A and B:
* Link A has 50 Mb capacity and latency 10ms
* Link H has 50 Mb capacity and latency 10ms
A database backup of 40Mbps is parted, and the traffic classified as low priority bulk traffic.
Which statement is correct?
- A. Link Aggregation may take place, and both links could be used.
- B. Packet duplication will take plant? to ensure both links are optimized.
- C. DMPO will perform pen How load balancing.
- D. Packets will be sent nut the highest latency link first as this is low priority bulk traffic
Answer: A
NEW QUESTION # 28
A network administrator is concerned about an Edge that may be approaching its documented limit for the number of simultaneous tunnels. The historical data showing the number of simultaneous tunnels over the time needs to be checked.
Where can this historical data be found?
- A. In the Monitoring section for the Edge in question, navigate to the ''System'' tab.
- B. Connect to the Edge CLI via SSH, and /opt/vc/bin/debug-py- tunnel_count
- C. In the Remote Diagnostics section of the UI, run the ''Total Counts dump'' test.
- D. Use the SNMP manage poll the vcelHealthObject tree in the VELOCLOUD-EDGE-MIB
Answer: D
NEW QUESTION # 29
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?
- A. BGP
- B. RIP Version 2
- C. OSPF
- D. Static
Answer: B
NEW QUESTION # 30
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. VCE cluster members should have unique IP addresses on its WAN interfaces
- B. VCF clusters member sync flow tables between themselves.
- C. A VCE cluster requires one dedicated interface for HA sync
- D. One VCE cluster can be formed with both virtual and hardware at the same lime
Answer: B
NEW QUESTION # 31
A customer is using hypervisor to install VMware Partner Gateways.
Which two hypervisors may be used? (Choose two.)
- A. ESXi
- B. Kubermetes
- C. Hyper-V
- D. XenServer
- E. KVM
Answer: C,E
NEW QUESTION # 32
Which statement is true about the VMware SD-WAN Gateway roles and assignments?
- A. If the Primary Gateway goes down. Cloud internet traffic would failover to Secondary gateway automatically
- B. The SD-WAN Orchestrator assigns the Gateways to the Edge automatically when it comes up based Oil (lie location of the Edge Branch-to-branch will choose the right Gateway automatically
- C. The Primarily and Secondary Gateways share the load fur both internet traffic and VPN traffic
- D. Primary Gateway cannot be used as Super gateway for Edge-to-Edge communication, even it all the Edges have a common Primary gateway
Answer: D
NEW QUESTION # 33
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Hub
- B. VMware SD-WAN Controller
- C. VMware SD-WAN Edge
- D. VMware SD-WAN Orchestrator
Answer: B
NEW QUESTION # 34
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. VRRP
- B. SD-WAN Service Reachable on the private overlay
- C. Cloud VPN
- D. Split Brain Detection
Answer: D
Explanation:
https://docs.vmware.com/en/VMware-SD-WAN/3.3/VMware-SD-WAN-by-VeloCloud-Administration-Guide/GUID-18DE770F-DF30-485D-8C3F-675D71C57556.html
NEW QUESTION # 35
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
- B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
- C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
- D. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
Answer: C
NEW QUESTION # 36
Which VMware SR-WAN component runs the Deep Application Recognition Engine?
- A. VMware SD-WAN Gateway
- B. VMware SD-WAN Controller
- C. VMware SD-WAN Edge
- D. VMware SD WAN Orchestrator
Answer: B
NEW QUESTION # 37
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. TCP 443
- B. UDF 2426
- C. TCP 80
- D. UDP 500
Answer: B
NEW QUESTION # 38
......
VMware 5V0-42.21 (VMware SD-WAN Design and Deploy Skills) Certification Exam is an excellent opportunity for IT professionals to validate their skills and knowledge in designing and deploying SD-WAN solutions. VMware SD-WAN Design and Deploy Skills certification is recognized globally and can help individuals advance their careers and contribute to their organization's success by enhancing their expertise in SD-WAN.
5V0-42.21 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.pass4training.com/5V0-42.21-pass-exam-training.html
Pass VMware 5V0-42.21 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1bO9FLM64R9sKrQ_JVQusELH4emPH6v_I
